Instruction Manual

6 Introduction

StorCase Technology, Inc. SATA 3Gbps DE110 User's Guide - Rev. A00

Figure 5: Receiving Frame Motherboard

(Rear View)

Receiving Frame Rear Panel

(Figure 5)

• I/O Connector (JP1) - The input/output connector provides a standard interface for all

SATA signals.

• SATA Power Connector (P1) - 15-Pin SATA power connector to accept DC power.

NOTE: If your system does not accommodate the SATA power connector, simply

use the SATA-to-DC Power adapter cable (included in the accessory

bag) to connect to your system's DC power.

• Drive Activity LED Pin (JACT1) - Pin 1 is used for host connection (cable not included)

to the Drive Activity LED (Figure 3A). Some SATA PC systems/host controllers provide

support for the Drive Activity LED feature (refer to the SATA PC system/host controller

manufacturer's documentation for further information).

• Factory Reserved Pins - These pins are reserved for factory use only - Do not install

jumper under any circumstances!

SATA Power

Connector

(P1)

I/O Connector

(J1)

= Pin 1

Drive Activity

LED Pin

JACT1

Reserved