Instruction Manual

10 Installation

StorCase Technology, Inc. SATA 3Gbps DE110 User's Guide - Rev. A00

5. Connect the I/O cable from the host adapter to the receiving frame. The Pin 1 indicator

on the cable must be properly aligned.

6. Connect the power cable from the DC power supply in the computer or expansion

chassis to the power connector on the SATA 3Gbps DE110 receiving frame. Refer

to Figure 5 for the SATA 3Gbps DE110 receiving frame power connector location.

7. Replace any expansion boards that may have been removed earlier. Replace the

system cover according to the manufacturer’s instructions.

Spacer Plates (Optional)

NOTE: Depending on the computer system, spacer plates may be positioned on the

receiving frame to utilize either top or bottom row of side-mounting holes

(Figure 8B).

The SATA 3Gbps DE110 is designed to fit most computer systems with standard 5.25"

peripheral slots. The installation of the spacer plates (provided) may or may not be neces-

sary.

Figure 8B: Spacer Plate Installation (Optional)

Spacer Plate

(2 Total)

0869