Instruction Manual

SATA 3Gbps DE110 User's Guide - Rev. A00 StorCase Technology, Inc.
Installation 11
Drive Activity LED
NOTE: Some SATA PC systems/host controllers provide support for the Drive Activity
LED feature (refer to the SATA PC system/host controller manufacturer's doc-
umentation for further information).
The Drive Activity LED can be enabled via host connection (cable not included) to Pin 1 located
on the Receiving Frame Motherboard (Figure 5).
Refer to the SATA PC system/host controller manufacturer's documentation for further infor-
mation.
8. Reconnect any system or peripheral cables removed earlier.
9. Turn ON power to the computer. If the installation has been successful, and all the
cables have been properly attached, the system should boot normally. Although the
computer may not recognize the DE110 yet, the front panel display on the DE110
receiving frame should illuminate.
10. The new drive may need to be formatted or initialized prior to use with the operating
system and applications software. Refer to the drive and/or computer manufacturer's
documentation for formatting information.