Owner's manual

14 Installation
StorCase Technology, Inc. SATA DE110 User's Guide - Rev. A03
Figure 9: Unit ID Select Switch Location
Drive Carrier
Guide
Typical Data Express
Receiving Frame
0087a
Unit ID Select
Rotating Switch
Unit ID Select Switch Settings
The following table lists the Unit ID Select Switch settings and the valid AT/IDE unit numbers.
Please note that all invalid switch settings have X's through them and result in a blank display
in the receiving frame display window.
Table 1: Unit ID Select Switch Settings
NOTE: The unit ID number display is for ID display purposes only.
Unit Select
Position
Parallel/
Serial ATA
Drive
LED Number
Display
054321876 9
12
0Blank 2* BlankBlank 1 3*
34
Blank BlankBlank
0834G
W1 Jumper
Position
Pins 1 & 2
Pins 3 & 4
* Unit ID Select Switch must be rotated by alignment tool.