Instructions / Assembly

ManualsBrandsStratco ManualsFencing2 in. x 2 in. x 7 ft. Grey Aluminum EZI Fence Post

DESIGN GUIDE

STRATCO EZI-FENCE

INSTALLATION GUIDE

This guide provides extra information for the

Stratco Ezi-Fence, fence-in-a-box product,

including installation details, component details

and FAQs. Please contact Stratco if you have any

further questions relating to the product or the

installation of your Ezi-Fence product.

INTRODUCTION EZIFENCE PRODUCTS

• Ezi-Fence Panel Box

• Ezi-Fence Post Pack

• Ezi-Fence Bracket Kit

• Ezi-Fence Base Plate Kit

• Ezi-Fence Gate Box

Summary of content (6 pages)

PAGE 1
INSTALLATION GUIDE INTRODUCTION EZI-FENCE PRODUCTS This guide provides extra information for the Stratco Ezi-Fence, fence-in-a-box product, including installation details, component details and FAQs. Please contact Stratco if you have any further questions relating to the product or the installation of your Ezi-Fence product.
PAGE 2
STRATCO EZI-FENCE DESIGN GUIDE EZI-FENCE BOX CONTENTS (ALL ITEMS SOLD SEPERATELY) EZI-FENCE PANEL BOX EZI-FENCE BRACKET KIT This box contains the top and bottom rails, and all vertical pickets to assemble a fence panel. To mount your panel you will need to buy a Post Pack and Bracket Kit or just a Bracket Kit, depending upon how you will be mounting your panel. This kit contains 4 brackets and screws to mount one panel to either Ezi-Fence posts, existing posts, or other structures.
PAGE 3
EZI-FENCE INSTALLATION DETAILS EZI-FENCE POST PACK INSTALLATION CUSTOM POST SPACING INSTALLATION If you choose to use the Ezi-Fence post pack for your fence run, you will need to space the posts at 74” centers as shown in the diagram below. If you will be installing the panel between custom posts or an existing structure, you will need to cut the fence railing to suit the opening using a drop saw with an aluminum cutting blade.
PAGE 4
STRATCO EZI-FENCE DESIGN GUIDE EZI-FENCE DESIGN GUIDE The following design guide is to be used to assist in the design of a fencing layout. Once the layout of a design has been finalised, the exact number and type of boxes can be selected. END/START OF FENCE RUN CREATING A 90° CORNER Use posts to start and end a fence run. Posts are to be fixed to the ground using either Base Plates (for fixing to concrete slabs or other hard surfaces) or by concreting the post in place.
PAGE 5
EZI-FENCE DESIGN GUIDE: EXAMPLES et ck l ne st Pa Po Pa Po QTY IN DESIGN 4 QTY OF BOXES REQUIRED et ck l ne st Bra Bra te Ga QTY IN DESIGN QTY OF BOXES REQUIRED POSTS 4 Post Pack (1 post per pack) 4 POSTS 2 Post Pack (1 post per pack) 12 BRACKETS 3 Bracket Kit (4 brackets per kit) 2 FENCE PANELS 2 Fence Box (1 panel per box) 3 FENCE PANELS 3 Fence Box (1 panel per box) 1 GATE 1 Gate Box (1 gate per box) et ck l ne st Pa Po QTY IN DESIGN Pa 3 POSTS 3 Post
PAGE 6
STRATCO EZI-FENCE DESIGN GUIDE FREQUENTLY ASKED QUESTIONS Q: Can you cut down the frames and slat? A: Yes, the product is made from aluminum so it is easy to cut. All you require is a drop saw with an aluminum cutting blade. Q: Is the product durable and will it stand the test of time? A: Yes, aluminum is an extremely durable metal, especially in coastal conditions. As an example, it is used to make boat pontoons which sit in and on the water.