Use and Care Manual

It is advised to clean the surface of the basin
regularly in order to remove any insoluble
products. Warm soapy water should be used
and afterwards the bath should be wiped. Do
not let cleaners soak in.
It is advised to always run some cold water
before turning on the hot tap, with hot water
temperatures not exceeding 65 Celsius
If deep scratches or burns appear, please use
sandpaper with at least 1500 grit. Dampen the
sandpaper slightly with water and then proceed
to rub the sandpaper in a circular motion around
the affected area, ensuring that you rub slightly
wider than the affected area.
CContinue doing so until the scratch is no longer
visible. In order to bring the affected area back
to its shiny form, please use a soft cloth and a
small amount of polish to buff the rubbed area.
Continue doing so until the affected area is
restored to its original shine.
USE & CARE GUIDE
Solid Surface Resin Basin Series