User Manual

6
PARKING MODE MENU SETTINGS
It is necessary to configure your camera to accept the hardwire kit.
Please ensure that your camera is updated to the latest firmware
available from the support section of our website.
Once the firmware update in complete, please select Power Output to
3-wire. Once the hardwire kit is installed and connected to the camera,
two additional options will be accessible in the camera’s menu.
The Parking Monitor menu allows you to select the frame rate for time
lapse recording. The options available are 1fps, 2fps, and 5fps, lower
frame rates use less storage space, higher frame rates will offer more
detail.
The Shutdown Timer menu allows you to select the amount of time
parking mode will be active for. The range of options available are 5, 10
and 30 minutes, as well as 1, 2, 3, 4, 6, 12, 18 and 24 hours.