GB STRONG UNIVERSAL REMOTE CONTROL “5 in 1” Thank you for purchasing the STRONG “5 in 1” Universal Remote Control. The remote can operate up to 5 different devices: TV, VCR, DVD player and 2 satellite receivers or cable TV boxes. The remote is powered by 2 “AAA” type 1.5 Volt batteries – not included in this packaging. Easy set-up 1. 2. 3. 4. 5. Insert 2 new batteries into the back of the remote. Following the markings in the battery compartment. Switch “ON” the device you wish to operate (e.g. your TV).
GB Use following device keys: for your TELEVISION, for your VIDEO RECORDER, for your DVD-PLAYER, for your SATELLITE RECEIVER – default setting for STRONG SRT 6125, 6155, 6355 for your second device: SATELLITE RECEIVER / CABLE BOX 3. 4. 5. 6. 7. Press the key again, and then the LED should start blinking which means your remote is in code search mode. Press the key on remote and check if your device (e.g. TV) switches OFF.
GB Basic functions: 1. STANDBY ON/OFF – Switches the device ON or OFF. 2. LED indicator – Blinks when remote control buttons are pressed. 3. TV – TV mode. Press this button to control your TV set. 4. SET – Used for programming other devices, such as VCR/DVD-Player etc. 5. VCR – VCR mode. Press this button to control your VCR. 6. STB2 – Second set top box mode. Press this button to controlyour second STB. 7. DVD – DVD-Playermode. Press this button to control your DVD-Player. 8.
GB Specific functions of the remote control: TV All functions are marked directly on the keys.
Code List www.strongsat.
Code List 48 www.strongsat.
Code List www.strongsat.
Code List 50 www.strongsat.
Code List www.strongsat.
Code List 52 www.strongsat.
Code List www.strongsat.
Code List 54 www.strongsat.