Product Manual

12
5. Assemble the handle, ensure that spring clips align with slots.
6. Close the release valve by turning it clockwise until it is firmly closed.
7. Before raising the vehicle double check and verify the saddle is centered and
also has full contact with the lifting point.
8. Pump handle to lift until saddle contacts load. Continue to pump the jack
handle to lift the vehicle to the desired height. After lifting, support the load
with appropriately rated vehicle support stands before working on the vehicle.
CAUTION: NEVER WIRE, CLAMP OR OTHERWISE DISABLE THE LIFT
CONTROL VALVE TO FUCTION BY ANY MEANS OTHER THAN BY USING THE
OPERATOR'S HAND. USE THE HANDLE PROVIDED WITH THIS PRODUCT OR
AN AUTHORIZED REPLACEMENT HANDLE TO ENSURE PROPER RELEASE
VALVE OPERATION. DO NOT USE EXTENSIONS ON THE AIR HOSE OR ON THE
OPERATING HANDLE.