Product Manual

2
Thank you very much for choosing a Strongway product! For future reference, please
complete the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the
entire manual to become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be
responsible for issues arising from modification. We strongly recommend this machine
not be modified and/or used for any application other than that for which it was
designed. If you have any questions relative to a particular application, DO NOT use
the machine until you have first contacted the distributor to determine if it can or
should be performed on the product.
For technical questions please call 1-800-222-5381.
INTENDED USE
This Bottle Jack is designed for lifting. The jack can be used vertically or angled to 3
degrees from vertical position. After lifting, loads must be immediately supported by
jack stands. Each model is suitable for use in lifting or positioning vehicles, machinery,
houses and/or other building structures. This bottle jack lifts 6 times faster than
standard bottle jacks. These jacks comply with ASME PALD Standards.
TECHNICAL SPECIFICATIONS
Description
Item
46235
Maximum Capacity
24,000 lbs.
Minimum Lift Height
9 inches
Maximum Lift Height
18-5/16 inches
Screw Top Adjustment
3-1/8 inches
Product Size
5.78in. x 4.56in. x 9in.
Weight
16.10 lbs.
Safe Operating Temperature is between 40°F – 105°F (4°C - 41°C)