Product Manual

5
* Position the Jack
Position the jack to only lift on the areas of the vehicle as specified by the vehicle
manufacturer.
* Always Use Jack Stands
After lifting the vehicle always support the load with appropriately rated vehicle Jacks
stands before working on the vehicle.
* Do Not Overload Jack
Do not overload this jack beyond its rated capacity. Overloading this jack beyond its
rated capacity can cause damage to or failure of the jack.
* Always Use on Hard Level Surfaces
This jack is designed only for use on hard level surfaces capable of sustaining the
load. Use on unstable or other possible loss of load.
* Chock and Block (Stabilize)
-Apply parking brake in vehicle before operating jack.
-A chock is a wedge for steadying an object and holding it motionless, or for
preventing the movement of a wheel.
Chock the wheel opposite the end being lifted.
-When you block a load, you secure and support a load that is being lifted. The block(s)
or stabilizer(s) should have a weight capacity that is greater than the weight of the load
which is being lifted.
* Center Load on Jack Saddle
Center load on jack saddle before lifting vehicle.
Off-center loads and loads lifted when the jack is not level can cause loss of load or
damage to the jack.
*Do not raise or lower the vehicle unless tools, materials and people are clear.
When the lift is being lowered, make sure everyone is standing at least six feet away.
Be sure there are no tools or equipment left under or around the jack before lowering.
* Always lower the jack slowly.
* DO NOT USE THE JACK TO SUPPORT OR STABILIZE A LOAD.
Using the jack to support or stabilize a load may result in unexpected movement and
result in serious injury, being crushed and death. Always securely chock and block
(stabilize) the load to be lifted. Never place any part of the body under a raised load
without properly chocking and supporting the load.
* Never use the jack on curved or tubular vehicle
Bumpers, this will result in the vehicle slipping off the jack and falling, causing serious
injury or death. Use a bumper lift to lift most vehicles with curved bumpers or plastic
bumpers.
* Wear ANSI-approved safety glasses and heavy-duty work gloves during use.
* Do not adjust the safety valve.
* Do not move or dolly vehicle while jack is in use.
* Stay alert. Use caution and common sense when operating jack. Do not use a
jack when tired, incoherent, dizzy, under the use or drugs or alcohol.
Training
-Read this manual before use. Do not allow anyone who has not read this manual,
and/or does not understand the requirements, use the jack.