Product Manual

9
3. Line up the handle to the handle socket located on the side of the jack, then insert
the handle inside the handle socket.
4. Secure the handle in place inside the handle socket. Without any vehicle on the jack,
cycle the lift up and down several times to insure the hydraulic system is operating
properly. (Perform to the Air Purge Procedure before first use.)
SYSTEM AIR PURGE PROCEDURE
IMPORTANT: BEFORE FIRST USE,
Perform the following Air Purge Procedure to remove any air that may have been
introduced into the hydraulic system as a result of product shipment and handling.
This step is to be completed without any weight on the jack.
1. Turn release valve counterclockwise on full turn to the open position.