Instruction Manual
Studio Electronics Boomstar Manual 5 Setup Essentials
2.3 Smart and Safe Connections
Alwayspower-oallaudiogearbeforemakinganyconnections.Failingtodosomaydamageyourspeakers,or
other audio equipment and possibly your Boomstar Synth.
Aftercompletingallconnections,setalllevelsto0.Poweronthevariousdeviceswithaudioamplierormonitoring
system last, then raise the volumes to an appropriate listening level.
a) Plug Boomstar +/-15 VDC power supply male 5 pin din plug into female 5 pin din connector mounted on the right
sideofbackpanel,nearbottomof synth(marked Pin1/:Com...).
b) Plugfemale3prongIECcablepluginto+/-15VDCpowersupplymale 3prongIECsocket.
c) Plug male 3 prong IEC cable plug into AC outlet.
Note: A switchable power strip is recommended and highly useful for power recycling.
BOOMSTAR POWER ADAPTER REMOVAL PROCEDURE:
a) Unplugfemale3prongIECcableplugfrom+/-15VDCpowersupply.
b) Unplugfemale3prongIECcableplugfromACoutlet.
c) UnplugBoomstarmale+/-15VDCpowersupplyplugfromfemaleconnectoron therightsideofbackpanel,near
bottomofsynth (markedPin1/: Com...).
IMPORTANT WARNING: DO NOT POWER ON OR OFF THE BOOMSTAR BY ANY OTHER
METHOD THAN THAT SPECIFIED ABOVE TO PREVENT DAMAGE TO UNIT. BE CERTAIN
TO STRICTLY FOLLOW THE AFOREMENTIONED CONNECTION PROCEDURE CAREFULLY
AND ACCURATELY. THE IMPROPER CONNECTION AND DISCONNECTION OF THIS POWER
SUPPLY MAY RESULT IN DAMAGE TO SYNTHESIZER AND SUPPLY. THE OPERATOR
OF THIS SYNTHESIZER ASSUMES ALL RESPONSIBILITY AND LIABILITY. ANALOGIA
INC./STUDIO ELECTRONICS—OWNERS, OFFICERS, AND EMPLOYEES, ASSUME NO
RESPONSIBILITY OR LIABILITY FOR PERSONAL AND PROPERTY DAMAGE INCURRED DUE
TO ACCIDENT, CARELESS HANDLING, ABUSE OR MISUSE, IMPROPER CONNECTION AND OR
INSTALLATION, OR IMPROPER ELECTRICAL CONTACT OR GROUNDING. OWNERSHIP AND
OR USE OF BOOMSTAR SYNTHESIZER CONSTITUTES AN AGREEMENT WITH THESE TERMS.