Installation Guide
10 11
14. Be sure the glass hanger brackets (EE) align
with the holes on the glass door panels (D), then
secure with previously removed screws and
washers.
14
17
15
18
16
13. Insert bushings into each hole at the top of both
glass door panels (D). Slide the glass hanger
brackets (EE) over the glass door panels (D) and
align with holes.
Hardware Used
EE
Glass hanger bracket
x 2
D
EE
EE
SCREW &
WASHERS
Hardware Used
Lowes.comLowes.com
EE
Glass hanger bracket
x 2
15. Carefully lean one glass door panel (D) inside
the tub with wheels facing away from the front of
tub. Note: Place a folded towel (not included) under
bottom edge of glass to protect glass and tub
surface.
13
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
D
D
16. Stand outside of the tub and lift the second glass
door panel (D) with the wheels facing you. Lower the
bottom edge of the glass door panel (D) into the tub,
then lift the wheels up into the top track (C). Pull the
top of the glass door panel (D) toward you to engage
the wheels on the inside of top track (C), then carefully
swing the bottom of the glass door panel (D) into a
vertical position.
Note: Roll the glass door panel (D) back and forth to
17. Standing inside the tub, hold the glass door
panel (D) with the wheels facing away from the front
of the tub. Lift the wheels up into the top track (C)
and pull the top of the glass door panel (D) toward
you to engage the wheels on the inside of the top
track (C). Carefully swing the bottom of the glass
door panel (D) into a vertical position, rolling the
door back and forth to ensure it is installed correctly.
Hardware Used
FF
x 3
Glass guide
18. Slide both glass door panels (D) to one side.
Install all three glass guides (FF) into the bottom track
(A) from inside the tub. Tilt the glass guide (FF) back
while inserting the top edge underneath the lip along
the top edge of the bottom track (A). Slide the glass
each end and one in the center.
FF
A
D
C
D
C