Installation Guide

ASSEMBLY INSTRUCTIONS
9.
Wrap electrical tape (not included) around
each individual wire connector (AA) down
to the wire. Push wire connectors (AA)
gently back into outlet box. Carefully push
excess wiring into outlet box.
WARNING: Make sure no bare wire or
wire strands are visible after making
connections.
10.
Attach fixture (A) to mounting plate (B) using the
mounting plate screws (C) previously removed
(Step 3, Page 6).
NOTE: Before tightening mounting plate screws
(C) completely, use level (not included) to check
fixture (A) -- adjust if necessary.
Restore power and test fixture (A).
If lights do not function, please refer to
TROUBLESHOOTING.
11.
9
9
Outlet Box
AA
AA
AA
10
11
B
A
CC
A