Installation Guide

ManualsBrandsStyle Selections ManualsBathroom & Wall LightingDunwynn 1-Light Nickel Modern/Contemporary Vanity Light

ITEM #1601737

MODEL #VBL14-1CH

VANITY LIGHT

BM19442

Purchase Date

ATTACH YOUR RECEIPT HERE

welcoming • sophisticated • inspiring

allen + roth

is a registered trademark

Français p. 9

Español p. 17

APPROVED FOR USE

IN DAMP LOCATIONS

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Sunday.

Summary of content (8 pages)

PAGE 1
welcoming • sophisticated • inspiring APPROVED FOR USE IN DAMP LOCATIONS allen + roth® is a registered trademark of LF, LLC. All Rights Reserved. ITEM #1601737 VANITY LIGHT MODEL #VBL14-1CH Français p. 9 Español p. 17 ATTACH YOUR RECEIPT HERE Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Sunday.
PAGE 2
TABLE OF CONTENTS Package Contents ............................................................................................................... 2 Hardware Contents .......................................................................................................................... 2 Safety Information ............................................................................................................... 2 Preparation ...........................................................................
PAGE 3
SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS. DANGER • DO NOT connect this fixture to an electrical system that does not provide a means for equipment grounding. Never use a fixture in a two-wire system that is not grounded.
PAGE 4
SAFETY INFORMATION CAUTION • TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing the fuse (or switching the circuit breaker off). • If you are not sure the lighting system has a grounding means, DO NOT attempt to install this fixture. Contact a qualified, licensed electrician for information regarding the proper grounding methods as required by the local electrical code in your area.
PAGE 5
ASSEMBLY INSTRUCTIONS 2. Remove existing fixture and disconnect all electrical wiring. 2 3. Remove mounting plate (B) from fixture (A) by removing mounting plate screws (C) from the fixture (A). 3 C C Save mounting plate screws (C) for later use.
PAGE 6
ASSEMBLY INSTRUCTIONS 4. Attach mounting plate (B) to outlet box (not included) using existing washers and outlet box screws or the machine screws (BB). NOTE: If the outlet box screws required for your outlet box are of a different size than the machine screws (BB), consult a licensed electrician before proceeding. 4 B BB Tighten machine screws (BB) to secure mounting plate (B).
PAGE 7
ASSEMBLY INSTRUCTIONS 6. Wrap electrical tape (not included) around each individual wire connector (AA) down to the wire. Push wire connectors (AA) gently back into outlet box. Carefully push excess wiring into outlet box. 6 Outlet Box AA WARNING: Make sure no bare wire or wire strands are visible after making connections. AA A AA 7. Attach fixture (A) to mounting plate (B) using the mounting plate screws (C) previously removed (Step 3, Page 5).
PAGE 8
CARE AND MAINTENANCE • Shut off main power supply. Wipe with soft cloth or use window cleaner. Do not use an abrasive cleaner. • Allow metal parts to cool before touching, dusting or cleaning the fixture. • Total wattage for this fixture is 15 watts; do NOT tamper with or attempt to repair LED component of fixture. TROUBLESHOOTING WARNING: Before beginning work, shut off the power supply to avoid electrical shock.