Installation Guide

ASSEMBLY INSTRUCTIONS
6
5.
Prepare wires by stripping 3/4 in. of insulation
from wire ends using wire strippers (not included).
Connect WHITE wire from fixture (A) to WHITE
wire from outlet box using existing wire connector
or wire connector (AA). Connect BLACK wire
from fixture (A) to BLACK wire from outlet box
using existing wire connector or wire connector
(AA). Connect BARE/GREEN ground wire from
outlet box to BARE ground wire from fixture (A)
with wire connector (AA).
NOTE: Screw wire connectors (AA) on in a
clockwise direction.
WARNING: Never connect ground wire to
WHITE or BLACK power supply wires.
WARNING: To reduce the risk of fire,
electrical shock or personal injury, wire
connectors (AA) are designed to accept only one
12-gauge house wire and two lead wires from the
light fixture. If your house wire is larger than
12-gauge or there is more than one house wire to
connect to the corresponding fixture lead wires,
consult an electrician for the proper size wire
connectors to use.
Hardware Used
Wire Connector
x 3
AA
5
AA
Outlet
Box
BLACK
WHITE
A
AA
AA
BARE/GREEN
Attach mounting plate (B) to outlet box (not
included) using existing washers and outlet box
screws or the machine screws (BB). NOTE: If the
outlet box screws required for your outlet box are
of a different size than the machine screws (BB),
consult a licensed electrician before proceeding.
Tighten machine screws (BB) to secure mounting
plate (B).
CAUTION: The fixture must be mounted to an
outlet box that is supported by the building
structure and can support the weight of the fixture.
Plastic outlet boxes are not recommended.
4.
Hardware Used
Machine Screw
x 2
BB
4
Outlet Box
B
BB
BB