Manualshelf

installation instructions

ManualsBrandsSub-Zero ManualsRefrigeration Supply LinesSub-Zero® Classic 30" Stainless Steel Wine Storage Dual Flush Inset Door Panel with Tubular Handle-7029160
1234
Metal Front Panels
7004566 / Rev A / February, 2008
Page 3 of 4
DRAWER
TOP TRIM
SCREW COVER
1
2
3
SCREWS
METAL FRONT
PANEL
Figure 7. Drawer Metal Front Panel Installation
SCREW COVER
TOP DRAWER TRIM
OVER/UNDER MODEL
FREEZER DRAWER TOP TRIM REMOVAL PROCEDURE:
1. At the back right-hand side of the top drawer trim (or handle-side trim), insert a flat blade screwdriver into the
notch in the screw cover and pry the cover away form the top trim, disengaging it from the top trim (See
Figure 5).
2. With a T-20, 6-lobe Torx type bit, extract the top trim mounting screws and pull the top trim from the drawer
(See Figure 6).
Figure 5. Screw Cover Removal
DRAWER
HANDLE-SIDE TRIM
Figure 6. Top Trim Removal
OVER/UNDER MODEL
DRAWER P
ANEL INSTALLA
TION PROCEDURE
(See Figure 7):
1. Install the drawer panel onto the drawer so that the panel clips slide under the drawer trim and the front panel
slides over the drawer trim.
2
2. Reattach the handle-side trim.
3. Reinstall the screw cover.