installation instructions

Metal Front Panels
7004566 / Rev A / February, 2008
Page 4 of 4
BOTT
OM GRILLE FRAME EXTRUSION REMOVAL PROCEDURE
(See Figure 8):
Use a T-20, 6-lobe Torx type bit to extract the two lower grille frame extrusion mounting screws from each side of
the grille and pull the bottom grille extrusion along with the corner brackets from the side grille extrusions.
BOTTOM GRILLE
FRAME EXTRUSION
PANEL GRILLE
FRAME ASSEMBLY
SCREWS
(2 OF 4)
Figure 8. Bottom Frame Extrusion Removal
BOTTOM GRILLE
FRAME EXTRUSION
PANEL GRILLE
FRAME ASSEMBLY
2
1
METAL FRONT
PANEL
Figure 9. Grille Metal Front Panel Installation
GRILLE P
ANEL INST
ALLATION PROCEDURE
(See Figure 9):
1. Install the grille panel into the grille frame so that the panel clips slide under the outer flange of the grille
frame extrusions and the front panel slides over the frame.
2. Reattach the bottom grille extrusion.