design guide

62
|
Sub-Zero Customer Care 800.222.7820
WINE STORAGE
Opening Dimensions
INTEGRATED WINE STORAGE
OPENING DIMENSIONS
W*
18" Column 18" (457)
24" Column 24" (610)
30" Column / Tall 30" (762)
*For stainless steel side panel accessory, add 1" (25) per panel to opening width.
The depth of each integrated (IW) model is 24" (610). Allow
for panel thickness when planning the nished opening
depth. A minimum 3
1
/2" (89) nished return is required on all
sides of the opening. Framed cabinets will require additional
nished ller material behind the face frame for a proper
installation. Refer to the illustration.
DUAL INSTALLATION
The unit can be installed next to an integrated refrigeration
model or another integrated wine storage model in a dual
installation. When installing two units side by side, the
opening width is the width of the two units added together.
A dual installation kit is required for this installation. If a dual
installation kit is not specied, a minimum 2"
(51) ller strip is
required between the units.
Dual installation kits are available through an authorized
Sub-Zero dealer. For local dealer information, visit the nd a
showroom section of our website, subzero.com. For ques-
tions regarding the installation, call Sub-Zero Customer
Care at 800-222-7820.
PRESS-TO-OPEN INSTALLATION
Column Models Only: For information regarding a press-to-
open (handleless) design, refer to the guides section of any
integrated column or integrated wine column product page
of our website, subzero.com.
W
OPENING WIDTH
84"
(2134)
OPENING
HEIGHT
NOTE:
3
1
/2" (89) finished returns will be visible and should be finished to match cabinetry.
SIDE
VIEW
TOP VIEW
FRONT VIEW
3
/4" (19)
TYPICAL
FRAMED
CABINETRY
W
FILLER
3
1
/2" (89)
FINISHED
RETURN
FRAMELESS
CABINETRY
W
3
/4" (19)
TYPICAL
3
1
/2" (89)
FINISHED
RETURN
25" (635)
OPENING
DEPTH
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN