design guide

subzero.com/specs | 71
WINE STORAGE
Custom Panel—Integrated
For integrated (IW) models, custom door panels and handle
hardware must be provided. Refer to the Panel Require-
ments chart and Typical Panel Dimensions.
Do not install a solid panel on the glass door unit. A solid
door is available as a sales accessory through an authorized
Sub-Zero dealer.
The thickness of the custom panel can vary. A minimum
5
/8" (16) thick panel is required, but the thickness can be
increased provided it does not exceed the weight limit. The
depth of each integrated model is 24"
(610). Allow for panel
thickness when planning the nished opening depth. Refer
to the full-scale template on page 55.
CAUTION
As reveals between cabinetry and the unit decrease,
severe nger pinching can occur while the door is
closing.
Finish all sides of the custom panels. They will be visible
when the door/drawer is open.
D-style handles are recommended. Locate the door handle
near the edge of the panel opposite the hinge and centered
top to bottom. Locate drawer handles near the top edge
of each panel. Stainless steel tubular and pro handles are
avail able through an authorized Sub-Zero dealer. For local
dealer information, visit the nd a showroom section of our
website, subzero.com.
PANEL REQUIREMENTS
WEIGHT PER PANEL MAX
Door Frame (column) 35 lb (16 kg)
Door Frame (tall) 25 lb (11 kg)
Drawer Panel (tall) 15 lb (7 kg)
PANEL THICKNESS MIN
All Panels
5
/8" (16)
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER
TYPICAL PANEL DIMENSIONS
W
49
3
/8"
(1254)
13
9
/16"
(345)
16
11
/16"
(424)
W
79
7
/8"
(2029)
Column Tall
Typical panel dimensions are based on an 84" (2134) nished
height, 4"
(102) toe kick, and
1
/8" (3) reveals. Panel dimen-
sions must be adjusted accordingly for all other installations.
Refer to the illustration for panel height and the chart below
for panel width.
PANEL WIDTH
MODEL W
18" Model 17
3
/4" (451)
24" Model 23
3
/4" (603)
30" Model 29
3
/4" (756)
STILES / RAILS MIN
Stiles 3
1
/4" (83)
Top Rail 7
3
/4" (197)
Bottom Rail (column) 9
1
/2" (241)
Bottom Rail (tall) 4
1
/2" (114)
DUAL INSTALLATION
For dual installations, refer to the illustration for panel height
and the chart below for panel width.
PANEL WIDTH
MODEL W
18" Model 17
13
/16" (452)
24" Model 23
13
/16" (605)
30" Model 29
13
/16" (757)