SDS

Product name:
SULLUBE
Issue Date:
05/22/2015
Page 4 of 10
Storage stability
Shelf life: Use within
24 Month
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure limits are listed below, if they exist.
Component
Regulation
Type of listing
Value/Notation
Barium dinonyl-naphthalene
sulfonate
OSHA Z-1 TWA 0.5 mg/m3 , Barium
ACGIH TWA 0.5 mg/m3 , Barium
None established
Exposure controls
Engineering controls: Use local exhaust ventilation, or other engineering controls to maintain
airborne levels below exposure limit requirements or guidelines. If there are no applicable exposure
limit requirements or guidelines, general ventilation should be sufficient for most operations. Local
exhaust ventilation may be necessary for some operations.
Individual protection measures
Eye/face protection: Use safety glasses (with side shields).
Skin protection
Hand protection: Use gloves chemically resistant to this material. Examples of
preferred glove barrier materials include: Butyl rubber. Ethyl vinyl alcohol laminate
("EVAL"). Examples of acceptable glove barrier materials include: Natural rubber
("latex"). Neoprene. Nitrile/butadiene rubber ("nitrile" or "NBR"). Polyvinyl chloride
("PVC" or "vinyl"). Viton. NOTICE: The selection of a specific glove for a particular
application and duration of use in a workplace should also take into account all
relevant workplace factors such as, but not limited to: Other chemicals which may be
handled, physical requirements (cut/puncture protection, dexterity, thermal protection),
potential body reactions to glove materials, as well as the instructions/specifications
provided by the glove supplier.
Other protection: Use protective clothing chemically resistant to this material.
Selection of specific items such as face shield, boots, apron, or full body suit will
depend on the task.
Respiratory protection: Respiratory protection should be worn when there is a potential to
exceed the exposure limit requirements or guidelines. If there are no applicable exposure limit
requirements or guidelines, wear respiratory protection when adverse effects, such as
respiratory irritation or discomfort have been experienced, or where indicated by your risk
assessment process. For most conditions, no respiratory protection should be needed;
however, if material is heated or sprayed, use an approved air-purifying respirator.
The following should be effective types of air-purifying respirators: Organic vapor cartridge
with a particulate pre-filter.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Physical state
Liquid.
Color
Green