SDS

Product name:
SULLUBE
Issue Date:
05/22/2015
Page 5 of 10
Odor
Mild
Odor Threshold
No test data available
pH
8 - 10 DOWM 101495 (16% in water/methanol, 1:10)
Melting point/range
Not applicable to liquids
Freezing point
See Pour Point
Boiling point
(760 mmHg)
Decomposes before boiling
Flash point
closed cup
210 °C ( 410 °F) ASTM D 93
Evaporation Rate (Butyl Acetate
= 1)
No test data available
Flammability (solid, gas)
No
Lower explosion limit
No test data available
Upper explosion limit
No test data available
Vapor Pressure
< 0.01 mmHg at 20 °C (68 °F) ASTM E1719
Relative Vapor Density (air = 1)
No test data available
Relative Density (water = 1)
0.9827 at 25 °C (77 °F) / 25 °C ASTM D941
Water solubility
< 0.1 % at 20 °C (68 °F) Measured
Partition coefficient: n
-
octanol/water
no data available
Auto
-
ignition temperature
385 °C (725 °F) ASTM E659
Decomposition temperature
No test data available
Kinematic Viscosity
33.9 - 42.1 mm2/s at 40 °C (104 °F) ASTM D 445
Explosive properties
No
Oxidizing properties
No
Liquid Density
0.9826 g/cm3 at 25 °C (77 °F) ASTM D941
Molecular weight
Not determined
pour point
-50 °C ( -58 °F) ASTM D97
NOTE: The physical data presented above are typical values and should not be construed as a
specification.
10. STABILITY AND REACTIVITY
Reactivity: no data available
Chemical stability: Thermally stable at typical use temperatures.
Possibility of hazardous reactions: Polymerization will not occur.
Conditions to avoid: Exposure to elevated temperatures can cause product to decompose.
Generation of gas during decomposition can cause pressure in closed systems.
Incompatible materials: Avoid contact with: Strong acids. Strong bases. Strong oxidizers.
Hazardous decomposition products: Decomposition products depend upon temperature, air supply
and the presence of other materials. Decomposition products can include and are not limited to:
Aldehydes. Alcohols. Ethers. Hydrocarbons. Ketones. Organic acids. Polymer fragments.