Product Manual
Table Of Contents
- Safety
- Description
- 2.1 Introduction
- 2.2 Compressor Component Description
- 2.3 Compressor Cooling And Lubrication System — Functional Description
- 2.4 Compressor Discharge System—Functional Description
- 2.5 Control System — Functional Description
- 2.6 Air Inlet System, Functional Description
- 2.7 Controller/Keypad
- 2.8 LCD Display
- 2.9 LED LIGHTS
- Specifications
- Installation
- Operation
- Maintenance
- 6.1 General
- 6.2 Maintenance After Initial 50 Hours of Operation
- 6.3 Maintenance Every 2000 Hours
- 6.4 Fluid Maintenance
- 6.5 Filter Maintenance
- 6.6 Air Filter Maintenance
- 6.7 Separator Maintenance
- 6.8 Belt Maintenance
- 6.9 Replacement and Alignment of Belt Pulleys
- 6.10 Hose Maintenance
- 6.11 TANK MOUNT PACKAGE MAINTENANCE
- 6.12 Troubleshooting – Introduction
SECTION 3 SHOPTEK
™
USER MANUAL
27
02250180-090 R00
Identification - ST1100, ST1500, 15-20HP
SEE TABLE NOTES:
1. ALLOW 4.00 FEET [1.25 METERS] MINIMUM CLEARANCE AROUND
MACHINE FOR ACCESS AND FREE CIRCULATION OF AIR.
2. A FOUNDATION OR MOUNTING CAPABLE OF SUPPORTING THE
WEIGHT OF PACKAGE, AND RIGID ENOUGH TO MAINTAIN THE
COMPRESSSOR FRAME LEVEL IS REQUIRED.
3. ALL DIMENSIONS ARE +/- .50” [12.7MM]
4. RECOMMENDED INCOMING CUSTOMER POWER SUPPLY IS
SHOWN ON DRAWING.
5. DOORS ARE REMOVABLE USING LIFT-OFF PINS.
6. ALL DIMENSIONS SHOWN IN INCHES WITH MILLIMETER DIMEN-
SIONS IN BRACKETS.
A1: EXHAUST AIR OUT
A2: AIR INLET
A3: INCOMING CUSTOMER POWER SUPPLY 1.96[50]DIA
A4: AIR OUT CONNECTION 1”NPT
A5: SERIAL PLATE
A6: HAND HOLD
A7: CONTAINMENT PAN DRAIN 1/4”NPT
A8: E-STOP
A9: CONTROLLER
MACHINE WEIGHTS
ST1100 772LBS[350KG]
ST1500 805LBS[365KG]