Product Manual

PROCEDURE FOR ORDERING PARTS
You should order parts from the nearest authorized Sullair representative or
the representative from whom the pneumatic tool was purchased. If for any
reason you cannot obtain parts in this manner, contact the factory directly at
the address, phone number, or website listed below.
Sullair North American Operations
3700 East Michigan Boulevard
Michigan City, IN 46360 USA
www.sullair.com
1-800-SULLAIR (USA only)
1-219-879-5451 (non-USA)
When ordering parts, always indicate the model and serial number of the tool.
You can get the serial number from the Bill of Lading for the tool, from the
Serial Number Plate located on the tool (see page # 8: serial number plate
location) and when applicable on the barrel of the tool.
The genuine Sullair service parts listed meet or exceed the demands of this
pneumatic tool. Use of replacement parts other than those approved by Sullair
will void the Sullair warranties specific to this product and may lead to
hazardous conditions over which Sullair has no control. Such conditions
include, but are not limited to, bodily injury and tool failure.
PROCEDURE FOR ORDERING PARTS
7
Subject to EAR, ECCN EAR99 and related export control restrictions.
02250218-226 R03
©
2015 Sullair, LLC.
Update: August 05 2015