User Manual

11
OPERATING YOUR FREEZER
Setting the Temperature Control
Your MOMCUBE
TM
freezer should arrive with its temperature preset for optimum breast milk
storage. If, however, the temperature needs to be reset, use the appropriate setting below, based on
your model number:
Model Number
Controller type
Controller
setting
FS24LMC
Dial thermostat
MAX
1. Set the controller to MAX.
After 24-48 hours, the
temperature will be set.
ALFZ36MC/ALFZ36LMCTBC
Digital thermostat
-4
o
F
1. Push and hold the SET key
for 3 seconds.
2. When the display shows
St, use the key to raise
and the key to lower the
temperature to -5
o
F.
3. Press the key, or press
no key for 30 seconds
and the temperature will
be set.
FS30LMC
Dial thermostat
Normal
1. Set the controller to MAX.
2. After 24-48 hours, adjust
the controller to NORMAL.
VT65MLBIMCADA
Digital controller,
located at the
bottom right
corner, below the
door
-5
o
F
1. Push and hold the SET
key for at least 3 seconds.
2. Push the UP/DOWN
arrows, and set the
temperature at -5
o
F.
3. Do not press any key for at
least 15 seconds, and the
temperature will be set.
NOTE: If the freezer is unplugged, has lost power, or is turned off, you must wait 3 to 5 minutes
before restarting the unit. If you attempt to restart before this time delay, the freezer will not
start.