User Manual

12
CARE AND MAINTENANCE
Defrosting Your Freezer
Your freezer requires manual defrosting, which should be done when the frost on the freezer walls
reaches 1/8” to ¼” in thickness.
To Defrost:
1. Remove any frozen items in the freezer, and take care the items do not begin to thaw.
2. Unplug the freezer and remove the shelves. The defrosting process is accelerated if the door
is left open.
3. Use a sponge or towel to remove water and melting ice from the freezer floor.
4. After the frost or ice has melted, dry the interior of the freezer thoroughly.
5. Restart the freezer by plugging it in, replacing the shelves, and turning the thermostat to the
desired temperature (see the “Setting the Temperature Control” section on the previous
page).
6. Replace any items in the freezer, once it has reached the desired temperature.
CAUTION: Do not use boiling water or an electric device, such as a hair dryer, to help speed the
defrosting process. This could damage the until. Also, never use a sharp or metallic
instrument to remove frost, as it may damage the cooling coils and will void the warranty.
Using a plastic scraper is recommended.
Cleaning Your Freezer
Turn the temperature control to "OFF", unplug the freezer and remove the contents, including
shelves.
Wash the inside surfaces with a warm water and baking soda solution. The solution should consist
of about 2 tablespoons of baking soda to a quart of water.
Wash the shelves and trays with a mild detergent solution.
The outside of the freezer should be cleaned with mild detergent and warm water.
Wring excess water out of the sponge or cloth before cleaning the area of the controls, or any
electrical parts.
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with
a clean soft cloth.
Vacation Time
Short vacations: Leave the freezer operating during vacations of less than three weeks.
Long vacations: If the freezer will not be used for several months, remove contents and unplug
the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave
the door open slightly, blocking it open if necessary.