SDS

江苏苏美达五金工具有限公司测试中心 SUMEC
Report Number:SUMEC-2020-020
Page 7 of 15 pages
Carbon monoxide, carbon dioxide, lithium oxide fumes.
6. 泄漏应急处理
Accidental release measures
为防止电池材料泄露或释放采取的措施
如果电池内部材料泄露，操作人员应立刻撤离事故区直到烟气消散。将通风设备
打开吹散危险性气体。用抹布擦净试验区，清除溢出的液体，将泄露电池放进塑
料袋中，然后放进钢制容器。避免皮肤和眼睛接触或吸入有害气体。
Steps to be taken in case Material is Released or Spilled
If the battery material is released, remove operators from area until
fumes dissipate. Provide maximum ventilation to clear out hazardous gases.
Wipe it up with a cloth, and dispose of it in a plastic bag and put into
a steel can. The preferred response is to leave the area and allow the
battery to cool and vapors to dissipate. Provide maximum ventilation.
Avoid skin and eye contact or inhalation of vapors. Remove spilled liquid
with absorbent and incinerate.
废弃物处置方法
建议将电池完全放电，锂金属电池消耗完电池内部的金属锂，并且交付给专业机
构处理。
Waste Disposal Method
It is recommended to discharge the battery to the end. Use up the metal
lithium inside the lithium metal battery, and delivered to professional
institutions for further treatment.
7. 操作处置和储存
Handling and storage
禁止打开、毁坏或焚烧电池，因为电池有可能在这些处理过程中发生爆炸、破裂或
泄露等事故。