Use and Care Manual

11
Grass Collection Bag Assembly + Fitting
The grass collecting bag prevents grass clippings being
thrown across your lawn as you mow.
1. Fit the grass collection bag support rod into the tube of
the grass collection bag (Fig. 8)
2. Clip the protective leather proles onto the support rod to
secure the assembly (Fig. 9).
3. Lift the ejector ap to the highest position, and assemble
the grass collection bag onto the mower by hooking the
sockets to both ends of the roller bar shaft (Fig. 10).
4. Hook the strap hook of the grass collection bag on the
center bar on the lower handle frame (Fig. 11). Adjust the
strap to an appropriate height so that the grass collection
bag does not rub against the ground while mowing or
transporting the unit.
5. The mower can be used without the grass collection bag.
When the grass collection bag is not attached, adjust the
ejector ap to a suitable position to shied ying grass
clippings (Fig. 12).
Operation
This reel mower is intended for private residential use to cut
grass in small lawns and gardens. This reel mower is not
intended to cut grass in public parks, playing elds, farms, or
forests. Do not use this reel mower for any application other
than that for which it is intended.
Adjusting the Cutting Height
This cordless reel mower is equipped with a 4-position height
adjustment system to tailor grass cutting heights from 0.6 inch
to 2.0 inch. To change the cutting height of the grass, follow
the instructions below.
mWARNING! Before making these adjustments, remove
the battery and the safety key from the lawn mower and wait
until the rotating blades have come to a complete standstill.
R
Fig. 8
Grass collection
bag support rod
Grass collection bag
R
Fig. 9
Protective
leatherproles
R
Fig. 10
Grass collection bag
Socket
R
Fig. 11
Grass collection bag
Strap hook
Locking
strap
Fig. 12
Ejectorap