User Manual

ManualsBrandsSun Joe ManualsChainsaws16 in. 48-Volt Electric Cordless Chainsaw (Tool-Only)

NOTE: Immediately after using the battery packs, the charge

level buttons may display a lower charge than they will if

checked a few minutes later. The battery cells “recover” some

of their charge after resting.

Charger Operation

mWARNING! Charge only iON+ 24V lithium-ion battery

packs with their compatible iON+ 24V lithium-ion charger.

Other types of batteries may cause personal injury and

damage.

To reduce the risk of electric shock, do not allow water to ow

into the charger's AC/DC plug.

When to Charge the iON+ 24V Lithium-

Ion Battery

NOTE: The iON+ 24V lithium-ion battery packs do not develop

a "memory" when charged after only a partial discharge.

Therefore, it is not necessary to run down the battery pack

before placing it into the charger.

• Use the battery charge indicator lights to determine when to

charge your iON+ 24V lithium-ion battery.

• You can "top-o" your battery packs' charge before starting

a big job or after a long day of use.

Charging the Batteries

1. Press the push lock buttons on the batteries to pull them

out of the equipment (Fig. 1).

2. Depending on your Snow Joe

+ Sun Joe

charger

model, how to recharge your lithium-ion battery will vary.

You may either insert your 24-volt battery into the

24VCHRG-QC Quick Charger (sold separately) or the

24VCHRG-DPC Dual Port Charger (sold separately)

(Figs. 2 – 3).

3. The battery indicator LEDs will twinkle and illuminate one

by one during the charging process. Unplug the charger

immediately when the 3 LEDs are all illuminated.

4. The 24VCHRG-QC Quick Charger (sold separately) and

the 24VCHRG-DPC Dual Port Charger (sold separately)

are also equipped with additional charging indicating light

which will indicate the charging status (Figs. 2 – 3).

mCAUTION! FIRE HAZARD. When disconnecting the

charger from the battery, be sure to unplug the charger from

the outlet rst, then disconnect the charger from the battery.

In order to operate this cordless chain saw you will need

iON+ 24V System batteries (models 24VBAT-LTE,

24VBAT-LT, 24VBAT, and 24VBAT-XR) and chargers

(models 24VCHRG-QC, 24VCHRG-DPC). Battery and

charger options available at sunjoe.com.

CORE TOOL

BATTERY + CHARGER SOLD SEPARATELY

Push lock button

(on both sides)

Fig. 1

Fig. 2

Battery pack

24VCHRG-QC

quick charger (Sold

separately)

red

Charging

green

Fully

Charged

Fig. 3