Replacement Part List

8
Know Your Cordless Pole Garden Tool System
Read the owner’s manual and safety instructions carefully before operating the cordless garden care system. Compare the
illustration below to the cordless garden tool system in order to familiarize yourself with the location of the various controls and
adjustments. Save this manual for future reference.
Technical Data
Battery Voltage* 24 V D.C.
Battery Capacity 2.0 Ah
Charging Time 80 mins (1.3 hour)
Battery Run Time (Max.) 40 mins for pole chain saw
55 mins for pole hedge trimmer
17 mins for pole leaf blower
Charger Input 100 – 240 V 50/60HZ
Charger Output 26 V DC 1.5 A
Chain saw Bar/Chain Length 8 inch (20.3 cm)
Chain Saw Cutting Thickness Max: 7.5 inch (19 cm)
Recommended: 6.5 in. (16.5 cm)
Chain Saw Oil Tank Capacity 2.7  oz
Chain Saw Overhead Reach 7.2 ft (2.2 m)
Chain Saw Head Angles 0° to 30°
Hedge Trimmer Blade Length 17.7 inch (45 cm)
Hedge Trimmer Cutting Diameter 0.6 inch (1.5 cm)
Hedge Trimmer Head Angles -45° to 90°
Blower Air Speed (Max.) 124 Mph
Blower Vacuum Air Flow (Max.) 440 CFM
Blower Head Angles -30° to 105°
Telescoping Pole Length 3.7 ft to 5.3 ft
(1.1 m to 1.6 m)
Weight (pole chain saw + battery) 7.7 lbs (3.5 kg)
Weight (pole leaf blower + battery) 6.2 lbs (2.8 kg)
Weight (pole hedge trimmer + battery) 7.7 lbs (3.5 kg)
*Initial no-load voltage, when fully charged, peaks at 24 volts; nominal voltage under typical load is 21.6 volts.
R
R
1. Hedge trimmer blade cover
2. Hedge trimmer head
3. Lock tab
4. Rotating button
5. Hedge trimmer blade
6. Blower tube
7. Blower tube lock tab
8. Blower head
9. Telescoping pole
10. Soft grip
11. Handle
12. Safety lock switch
13. On/O switch
14. Battery compartment
15. Telescoping lock
16. Assembly lock
17. Air vent
18. Battery charger (iCHRG24-AC)
19. Charger plug
20. Charge socket
21. Push button for battery indicator
22. Battery indicators
23. Push lock button
24. 24 V Lithium-iON battery
(iBAT24-LTE)
25. Chain saw head
26. Oil cap
27. Chain saw bar sheath
28. 8-inch cutting chain
29. 8-inch guide bar
30. Chain tensioner ring
31. Chain/sprocket end cover knob
32. Chain/sprocket end cover
33. Oil level window
1
2
3 4
5
6
7
8
4
3
9
11
12
13
10
14
15 16
Bottom of the blower head
17
18
19
20 21
22
23
24
25
3 4
26
27
2829
3031
32
Back of the chain saw head
33