Replacement Part List

12
Grass Collection Bag Fitting
1. Lift the ejector ap up, and remove the mulching plug
inserted in the rear discharge opening.
2. With the ejector ap lifted up, hold the grass collection
bag by the handle and hook the ends of the support rod
on the hooks on both sides (Fig. 10).
3. Release the ejector ap so that it rests on the grass bag.
(Fig. 11).
Side Discharge Chute Assembly + Fitting
Use the side discharge chute on your mower when the grass is
too tall to mulch or when side discharging is preferred.
The grass clippings produced by the side discharge chute are
noticeably larger than those produced by the mulching plug.
NOTE: When using the side discharge chute, do not assemble
the grass collection bag. Insert the mulching plug in the rear
discharge opening.
1. Lift up the side discharge door.
2. Align the grooves on the side discharge chute with the
pins on the underside of the door, and hook the grooves
on the pins (Fig. 12).
3. Release the side discharge door.
Mulching Plug Assembly + Fitting
Your mower is equipped with a mulching plug to allow the
blade to cut and recut the grass for ner clippings.
NOTE: When using the mulching plug, do not assemble the
grass collection bag or the side discharge chute.
NOTE: When the grass collection bag is not attached, the
mulching plug must be inserted in the rear discharge opening.
1. Lift up the ejector ap.
2. Insert the mulching plug fully into the rear discharge
opening and make sure it's seated securely (Fig. 13).
3. Release the ejector ap.
Operation
This lawn mower is intended for private residential use to cut
grass in small lawns and gardens. This lawn mower is not
intended to cut grass in public parks, playing elds, farms or
forests. Do not use this lawn mower for any application other
than that for which it is intended.
Adjusting the Cutting Height
This cordless lawn mower is equipped with a 7-position height
adjustment lever to tailor grass cutting heights from 1.2 in. to
3.75 in. (3 cm to 9.5 cm). To change the cutting height of the
grass, follow the instructions below.
R
Fig. 10
Ejector ap
Grass collection bag
Hook (on
both sides)
Support rod
Fig. 11
Ejector ap
Grass
collection
bag
Fig. 12
Underside
Pins
Grooves
Side discharge door
Side discharge chute
Fig. 13
Mulching plug
Ejector ap
Rear
discharge
opening