Replacement Part List

16
5. Fit the new blade on the same position and secure with
the original lug nut (Fig. 22).
Storage
Follow the steps below to prepare the lawn mower for storage:
1. Remove the battery and the safety key from the
battery compartment.
2. Remove the grass collection bag. Engage the height
adjustment lever in the lowest cutting height slot.
3. Clean the mower with a damp cloth or hand brush.
4. Inspect the mower carefully for worn, loose or damaged
parts. Check connections and screws and tighten if
necessary. Pay special attention to the mower blade and
replace/sharpen if it shows signs of wear. Refer to the
Maintenance and Care section.
5. Store the mower indoors in a dry, clean and cool area
out of the reach of children. Do not store the unit next to
corrosive materials, such as fertilizer and rock salt.
6. Do not cover the lawn mower with a solid plastic sheet.
Plastic coverings trap moisture around the mower,
which can damage the unit.
7. Press down the handle releasing button located on the
middle bar of the handle frame, meanwhile push the
upper handle frame to insert it into the lower handle
frame.
8. Press and hold the handle latch. Gently pivot the handle
frame toward the front of the mower until you hear and
feel the handle frame locks in the storage position
(Fig. 23).
Disposal
Recycling + Disposal
The product comes in a package that protects it against
damage during shipping. Keep the package until you are
sure that all parts have been delivered and the product is
functioning properly. Recycle the package afterwards or keep
it for long-term storage.
WEEE symbol. Waste electrical products should not
be disposed of with household waste. Please
recycle where facilities exist. Check with your local
authority or local store for recycling regulations.
Battery Caution + Disposal
Always dispose of your battery pack according to federal,
state, and local regulations. Contact a recycling agency in your
area for recycling locations.
Fig. 20
Blade
27 mm lug
wrench
Fig. 21
Blade
Lug nut
Fig. 22
New blade
Lug nut
Fig. 23
Storage position