Product Manual

Maintenance and Care
General
• Always keep the mower clean and free of grass clippings.
• After each cutting session, scrap or blast with water the built up
grass from the underside of the blade housing.
• Clean plastic parts with a damp cloth. Do not use solvents or
cleaning fluids on plastic components.
• Check all nuts, bolts and screws before each use.
• Store the mower in a dry area.
Blade Maintenance
The steel blade is designed to provide a fine cut in long or tough
grass. Deterioration in the quality of cut indicates blade wear or
damage. Follow these steps to determine if the blade needs to be
repaired or replaced:
1. Disconnect the electrical supply to the mower.
2. Turn the mower on its side so the underside of the
blade housing is exposed.
3. Check the blade.
a. If the blade is blunt or has minor wear,
then re-sharpen.
b. If the blade has major wear or damage
(i.e.: gouged, bent), replace. Please call Sun
Joe customer service (1-866-766-9563)
for assistance.
Blade Replacement
Important: Only use original replacement parts specified for
this mower.
1. Disconnect the electrical supply to the mower.
2. Turn the mower on its side so the underside of the
bladehousing is exposed.
3. Use a cloth to grip the blade or wear heavy-duty gloves.
4. Using the spanner provided, turn the nut counter-
clockwise to loosen and remove the nut from the
motor spindle.
5. Fit the blade and the special Belleville washer back
on in the correct direction.
B
10
A
A
B
Figure 15
A. Blade B. Spanner
Figure 16
A. Nut B. Blade