Product Manual

Before using the mower, follow these
instructions to assemble the Handle and
Grassbox.
Handle Assembly
1. Fit the lower supports into the two holes in the machine
body (A) and fasten them with the screws (B) provided.
.
2. Slide the wire management ‘Clip’ (D) onto the upper grip (B).
3. Join the upper grip (B) to the lower supports (C) by means
of the knob and bolts (A) provided.
C
Assembly
CAUTION


Inspect wiring, which, if damaged during shipping,
may cause serious bodily injury during equipment
use. If any damage is seen or suspected, do not
assemble. Instead, contact Sun Joe customer service
(1-866-766-9563) for assistance.
Handle with care during assembly so that electrical
wiring does not become damaged.
Figure 3
A. Machine body B. Screw
6
A. Tighten knob B. Upper grip
C. Lower support tube D. Cable relief
Figure 4
A
B
A
B
D