User Manual

7
Unpacking
Carton Contents
Electric lawn mower
Upper handle
Lower handle
Upper handle knobs and bolts (2)
Lower handle knobs (2)
Grass collection bag
Side discharge chute
Mulching plug
Manuals and registration card
1. Carefully remove the lawn mower and check to see that all
of the above items are supplied.
2. Inspect the product carefully to make sure no breakage
or damage occurred during shipping. If you nd damaged
or missing parts, DO NOT return the unit to the store.
Please call the Snow Joe
®
+ Sun Joe
®
customer service
department at 1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric lawn
mower. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suocation
risk!
Assembly
m
WARNING! Do not connect to the power supply
until assembly is complete. Failure to comply could result in
accidental starting and serious personal injury.
mWARNING! Never operate the mower without the
proper devices in place. Never operate the mower with
damaged safety devices. Failure to heed these warnings can
result in serious injury.
Handle Assembly
1. Fit the lower handle on the unit by inserting the unit's
threaded ends into the holes on the lower ends of the
lower handle (Fig. 1).
NOTE: You may need to bend the lower handle inwards
slightly while tting the lower handle over the threaded
ends.
2. To secure the lower handle, install the lower handle knobs
on the threaded ends, and tighten (Fig. 2).
3. Align the upper handle with the holes on the upper end of
the lower handle, and insert the upper handle bolts into
the holes from the inside (Fig. 3).
Fig. 1
Lower handle
Threaded
ends
Fig. 2
Lower handle
Lower handle
knobs