Replacement Part List

7
Unpacking
Carton Contents
Electric pressure washer with detergent spray bottle
Trigger gun
Spray wand assembly
Needle clean-out tool (included with manual packet)
High-pressure hose
• Garden hose adapter (female coupler)
Manuals with registration card
1. Carefully remove the pressure washer and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric
pressure washer. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suocation risk!
mWARNING! Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
Assembly
Spray Gun Assembly
1. Fit the two pieces of the spray wand assembly together
and rotate it until the two parts are completely locked
(Fig. 1).
2. Fit the spray wand assembly into the gun and turn the
rotatable end-piece of the wand until the two parts are
completely locked (Fig. 2).
Connect the Spray Gun to the Pressure
Washer
1. Connect the quick-connect end of the high-pressure hose
to the trigger gun (Fig. 3). You will hear a click when it
snaps into place. To release the high-pressure hose from
the trigger gun, push the release button on the trigger gun.
Fig. 1
RELEASE
Spray wand assembly
Trigger gun
Fig. 2