Replacement Part List

ManualsBrandsSun Joe ManualsHedge Trimmers2-Amp Electric 2-in-1 Telescoping Power Weeder + Grass Shear

, LLC

SAVE THESE INSTRUCTIONS

A Division of Snow Joe

, LLC Model WJ101E Form No. SJ-WJ101E-880E-M

ELECTRIC GRASS SHEAR + WEEDER

3.3-INCH | 2-AMP| TELESCOPING POLE | MULTI-ANGLE

OPERATOR’S MANUAL

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety WARNINGS!

You and any other operator of this electric grass shear +

weeder must read, understand, and follow these instructions

in their entirety. Failure to follow these instructions may result

in ELECTRIC SHOCK, FIRE, and/or serious PERSONAL

INJURY.

Notice the personal safety alert symbol m used in this

manual to draw your attention to a WARNING given along

with the particular operating instruction. This means that

the operation requires special ATTENTION, CAUTION, and

AWARENESS.

mWARNING! This unit can be dangerous! Careless or

improper use can cause serious injury.

mWARNING! The moving blades can cut you. Keep

hands and feet away from the blades and the cutting area.

Before using the grass shear + weeder, familiarize yourself with

the controls, especially how to stop the grass shear + weeder

in an emergency. The only individuals who should use the

grass shear + weeder are those who thoroughly understand

these instructions and know how to properly operate the unit.

Children should never be allowed access to the grass shear +

weeder.

Retain this manual for future reference and reread it at the start

of each trimming season.

1. Keep work area clean and well-lit – Cluttered, dark

areas invite accidents.

2. Replacement parts – When servicing this unit, use only

identical replacement parts. Replace or repair damaged

cords immediately.

3. Avoid dangerous environments – Do not use the grass

shear + weeder in rain or in damp or wet locations. Do not

operate the grass shear + weeder in gaseous or explosive

atmospheres or use the grass shear + weeder near

ammable or combustible liquids. Motors in these tools

normally spark, and the sparks might ignite fumes.

4. Do not use the grass shear + weeder in the rain.

5. Keep children, bystanders, and pets away – All

spectators, including pets, should be kept a safe distance

away from the work area.

6. Dress properly – Do not wear loose clothing or jewelry as

such articles can become caught in moving parts. Wear

a protective covering to contain long hair. Wearing rubber

gloves and substantial non-slip footwear is recommended

when working outdoors.

7. Use safety glasses – Also use safety footwear, snug-

tting clothing, protective gloves, hearing, and head

protection.

8. Use the right tool – Do not use this machine for any job

except that for which it was intended.

9. Avoid accidental starting – Do not carry the power grass

shear + weeder with your nger on the switch. Make sure

the switch is o before plugging in or unplugging the unit.

10. Do not abuse the cord – Never carry the grass shear +

weeder by the cord or yank the cord to disconnect it from

the receptacle. Keep the cord away from heat, oil, and

sharp edges.

mCAUTION! Moving parts will continue to run for several

seconds after turning o the machine.

11. Moving parts – Don’t grasp the exposed cutting blades or

cutting edges when picking up or holding the grass shear

+ weeder.

12. Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at

the rate for which it was designed.

13. Do not overreach – Keep proper footing and balance at

all times.

14. Stay alert – Watch what you are doing. Use common

sense. Do not operate the grass shear + weeder when you

are tired or under the inuence of drugs, alcohol, or other

medication.

15. Disconnect the tool – Disconnect the grass shear +

weeder from the power supply when it is not in use,

before servicing it, when changing accessories, and when

performing any other maintenance task.

Summary of content (12 pages)

PAGE 1
R OPERATOR’S MANUAL A Division of Snow Joe®, LLC ELECTRIC GRASS SHEAR + WEEDER 3.3-INCH | 2-AMP| TELESCOPING POLE | MULTI-ANGLE Model WJ101E Form No. SJ-WJ101E-880E-M IMPORTANT! flammable or combustible liquids. Motors in these tools normally spark, and the sparks might ignite fumes. Safety Instructions 4. Do not use the grass shear + weeder in the rain. 5. Keep children, bystanders, and pets away – All spectators, including pets, should be kept a safe distance away from the work area.
PAGE 2
16. Store idle tool indoors – When not in use, the grass shear + weeder should be stored indoors in a dry and high or locked-up place out of the reach of children. m 17. Maintain the grass shear + weeder with care – Keep the cutting edges sharp and clean for optimal performance and to reduce the risk of injury. Inspect the extension cord periodically and immediately replace it if damaged. Keep the handles dry, clean, and free from oil and grease.
PAGE 3
8. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. 9. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 10. Have your tool repaired by an electrician or a qualified service center. This power tool complies with relevant safety requirements.
PAGE 4
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand and follow all instructions on this tool before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand and follow all instructions in the user manual(s) before attempting to assemble and operate. SAFETY ALERT – Indicates a precaution, a warning or a danger.
PAGE 5
Know Your Electric Grass Shear + Weeder 2 1. Appliance cord 2. Rear handle 3. Extension cord restraint hook 3 4. Trigger switch 4 5. Handle knob 6. Adjustable auxiliary handle 7. Telescoping pole adjustment knob 8. Telescoping pole 1 6 9. Angle adjustment knob 10. Cutting head 11. Grass shear blade 5 12. Grass shear blade sheath 7 8 9 10 11 12 Technical Data Rated Voltage 120 V ~ 60 Hz Cutting Diameter (Max) 3.3 in. (8.5 cm) Power 2A Telescoping Pole Length (Max) 45.3 in.
PAGE 6
Unpacking 2. For maximum comfort and control, adjust the auxiliary handle to fit your height. Shorter users adjust the auxiliary handle to a lower position (away from your body). Taller users adjust the auxiliary handle to an upper position (towards to your body). Make sure your forearm is straight when using the machine (Fig. 2). Carton Contents • Electric grass shear + weeder housing • Grass shear blade (pre-assembled) • Grass shear blade sheath Fig.
PAGE 7
Operation Cutting Head Angle Adjustment The telescoping pole is equipped with an adjustable head which can be rotated 180º (Fig. 4). Follow the instructions below to adjust the angle. Starting + Stopping Before you start the unit, make sure the grass shear + weeder is not contacting any object. 1. Loosen the cutting head by turning the angle adjustment knob clockwise (Fig. 4). 1. Remove the grass shear blade sheath (Fig. 6). 2.
PAGE 8
Weeding Tips 6. Cut repeatedly from up and down in layers when the grass is very high (Fig. 10). 1. To loosen the soil and remove deep-rooted weeds, rotate the cutting head 180º as shown in Figure 4. Fig. 10 2. Place the bottom tip of the blade into the soil and then tilt the power weeder downwards towards the ground to pull the whole root out (Fig. 8). Fig. 8 7. Keep the cutting device at an angle of about 10° to the ground when shearing.
PAGE 9
Fitting and Changing the Blades 1. Keep the cutting blades clean and free of debris. Remove trimmings. 1. To fit or change the blade, place the grass shear + weeder on a hard surface. Turn the unit upside down. 2. Apply a small amount of suitable lubricant on the blades to retain a good cutting performance (Fig. 13). 2. Unscrew the blade cover and gently remove the shear blade by lifting the end tip of the blade off of the grass shear + weeder unit (Fig. 11). Fig.13 Fig.
PAGE 10
Model and Serial Numbers Record the following numbers from the housing or handle of your new product: When contacting the company or reordering parts, you will need to provide the model and serial numbers of your product. These are found on the decal affixed to the housing or handle of your grass shear + weeder. Copy these numbers into the space provided below. W J 1 0 1 E Model #: Serial #: Troubleshooting Most difficulties are easy to fix.
PAGE 11
SNOW JOE® + SUN JOE® CUSTOMER PROMISE ABOVE ALL ELSE, Snow Joe® + Sun Joe® are dedicated to you, our customer. We strive to make your experience as pleasant as possible. Unfortunately, there are times when a product does not work or breaks under normal operating conditions. We think it’s important that you know what you can expect from us. That’s why we created the Snow Joe® + Sun Joe® promise. OUR PROMISE: Snow Joe® + Sun Joe® warrant new products for two years from the date of purchase.
PAGE 12
snowjoe.com mWARNING! This product or its power cord contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information go to www.P65Warnings.ca.gov. mWARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known [to the State of California] to cause cancer, birth defects, or other reproductive harm.