StorageTek Installation Manual
Table Of Contents
- Summary of Changes
- Contents
- Figures
- Tables
- Preface
- Safety
- Seguridad
- Hardware Installation
- Quick Installation Procedure
- Standard Installation Procedure
- Preparing for the Installation
- Unpacking the Library
- Inspecting the Library and Drives
- Preparing the Installation Location
- Positioning the Library
- Choosing SCSI HVD or LVD
- Installing the External Fibre Channel Router
- Connecting the External SCSI Cables
- Connecting Fiber and SCSI Cables
- Attaching the Personality Module
- Attaching the Cell Barrier Clip
- Inserting the Cartridges
- Drive Compatibility Issues
- Installing the Drives
- Powering-on the Library and Drives
- Recording the Configuration Information
- Locations, Specifications, and Cables
- SNMP
- Index
Standard Installation Procedure
1-16 Revision L 96053
Connecting Fiber and SCSI Cables
For libraries with an optional Fibre Channel router, follow the cable routing shown in
following two figures The first figure shows cable routing for the library, four drives, and
internal router.
The second figure shows a detail of cable routing to the SN3300 external router.
1. Fiber cables to/from host
2. Four 300 mm (11.81 in.) LVD SCSI cables
3. One 600 mm (1.97 ft) LVD SCSI cable
4. Two SCSI terminators