StorageTek Installation Manual
Table Of Contents
- Summary of Changes
- Contents
- Figures
- Tables
- Preface
- Safety
- Seguridad
- Hardware Installation
- Quick Installation Procedure
- Standard Installation Procedure
- Preparing for the Installation
- Unpacking the Library
- Inspecting the Library and Drives
- Preparing the Installation Location
- Positioning the Library
- Choosing SCSI HVD or LVD
- Installing the External Fibre Channel Router
- Connecting the External SCSI Cables
- Connecting Fiber and SCSI Cables
- Attaching the Personality Module
- Attaching the Cell Barrier Clip
- Inserting the Cartridges
- Drive Compatibility Issues
- Installing the Drives
- Powering-on the Library and Drives
- Recording the Configuration Information
- Locations, Specifications, and Cables
- SNMP
- Index
96053 Revision L 1-19
Standard Installation Procedure
Attaching the Cell Barrier Clip
If your library is a 20-cell version, the tape management software only recognizes the data
cells that are in Column 0 and the top nine cells of Column 1. To remind the operator to
not place data cartridges into the other cells, attach the cell barrier clip, as shown in the
following figure.
Use the PERS MODULE Menu on the operator panel to determine your library’s cell
capacity.
Figure 1-2. Attaching the Cell Barrier Clip (L201_124)
1. Cell barrier clip for 20-cell version