StorageTek Installation Manual
Table Of Contents
- Summary of Changes
- Contents
- Figures
- Tables
- Preface
- Safety
- Seguridad
- Hardware Installation
- Quick Installation Procedure
- Standard Installation Procedure
- Preparing for the Installation
- Unpacking the Library
- Inspecting the Library and Drives
- Preparing the Installation Location
- Positioning the Library
- Choosing SCSI HVD or LVD
- Installing the External Fibre Channel Router
- Connecting the External SCSI Cables
- Connecting Fiber and SCSI Cables
- Attaching the Personality Module
- Attaching the Cell Barrier Clip
- Inserting the Cartridges
- Drive Compatibility Issues
- Installing the Drives
- Powering-on the Library and Drives
- Recording the Configuration Information
- Locations, Specifications, and Cables
- SNMP
- Index
Specifications
2-6 Revision L 96053
■ Specifications
The following pages provide library, drive, and cartridge specifications.
See Figure 2-7 on page 2-9 or Figure 2-8 on page 2-10 for library installation dimensions.
For more specific drive and cartridge information, refer to the vendor Web site or
documentation.
Library Environment
The following table lists the library environment specifications.
Figure 2-6. Ultrium Drive Label Locations (L201_165)
1. CEI serial number
2. FRU serial number
3. Warranty ID number
Table 2-1. Library Environment Specifications
Item Measurements
Operating Storage Transporting
Temperature +10 to +40ºC
+50 to +104ºF
+10 to +40ºC
+50 to +104ºF
-40 to +60ºC
-40 to +140ºF
Humidity 20 to 80% 10 to 95% 10 to 95%