StorageTek Installation Manual
Table Of Contents
- Summary of Changes
- Contents
- Figures
- Tables
- Preface
- Safety
- Seguridad
- Hardware Installation
- Quick Installation Procedure
- Standard Installation Procedure
- Preparing for the Installation
- Unpacking the Library
- Inspecting the Library and Drives
- Preparing the Installation Location
- Positioning the Library
- Choosing SCSI HVD or LVD
- Installing the External Fibre Channel Router
- Connecting the External SCSI Cables
- Connecting Fiber and SCSI Cables
- Attaching the Personality Module
- Attaching the Cell Barrier Clip
- Inserting the Cartridges
- Drive Compatibility Issues
- Installing the Drives
- Powering-on the Library and Drives
- Recording the Configuration Information
- Locations, Specifications, and Cables
- SNMP
- Index
Overview
A-2 Revision L 96053
Figure A-1. SNMP and DNS Network Block Diagram Example (L201_523)
1. Ethernet connection (ENET) for the library.
2. To configure the library to support DNS.
Note: You must enter the Domain Name Service (DNS) configuration only if your Simplified Network
Management Protocol (SNMP) agent is set to trap named recipients; if SNMP is set for numbered
recipients (by using IP addresses), no entries are required.
3. An example of a table that matches IP addresses to selected DNS names.
4. SNMP software application that implements the role of manager. Some applications include:
HP Open View
IBM NetView
Sun Microsystems SunNet Manager
5. The MIB is stored on the LLC card. To view the contents of the MIB database, enter:
http://IP.Address/Lseries.mib or http://library_name/Lseries.mib
6. Library Admin. is an optional feature for the library. It provides the GUI-based monitoring system and is
separate from the SNMP application. Library Admin provides an easy and convenient way to configure
the library SNMP agent using a network configuration panel or screen. Library Admin also provides
other beneficial functions and display screens for the library.