User's Manual

18 Sun Fire X4150 Server Installation Guide • May 2009
Caution – Always load equipment into a rack from the bottom up so that it will not
become top-heavy and tip over. Extend your rack’s anti-tip foot to prevent the rack
from tipping during equipment installation.
1. Push the slide-rails into the slide-rail assemblies in the rack as far as possible.
2. Raise the server so that the rear ends of the mounting-brackets are aligned with
the slide-rail assemblies that are mounted in the equipment rack. (See
FIGURE 2-6.)
3. Insert the mounting-brackets into the slide-rails, then push the server into the
rack until the mounting-brackets encounter the slide-rail stops (approximately
12 inches, or 30 cm).
FIGURE 2-6 Inserting the Server With Mounting-Brackets Into the Slide-Rails
Mounting-bracket
inserted into
slide-rail
Slide-rail
release button
Slide-rail
assembly
mounted on
rack post
Slide-rail
lock