User's Manual

Chapter 2 Installing the Sun Fire X4150 Server Into a Rack with Slide-Rails 19
4. Simultaneously push and hold the slide-rail release buttons on each mounting-
bracket while you push the server into the rack. (See
FIGURE 2-6.) Continue
pushing until the slide-rail locks on the front of the mounting-brackets engage
the slide-rail assemblies.
You will hear an audible click.
Caution – Verify that the server is securely mounted in the rack and that the slide-
rails locks are engaged with the mounting-brackets before continuing.
Installing the Cable Management Arm
Use this procedure to install an optional cable management arm (CMA). FIGURE 2-7
shows the CMA.
FIGURE 2-7 Cable Management Arm (CMA)
1. Unpack the cable management arm parts.
2. Take the CMA to the back of the equipment rack and ensure that you have
adequate room to work around the back of the server.
Note – References to “left” or “right” in this procedure assume that you are facing
the back of the equipment rack.
CMA rail
extension