User's Manual

Chapter 4 Configuring the Preinstalled Solaris 10 Operating System 51
1. Open the /boot/grub/menu.lst file in a text editor.
2. Modify the following line in the file to change the default so that the console
output goes to the video port:
default 1
3. Run the following command to add the Xserver startup scripts:
/usr/dt/bin/dtconfig -e
4. Reboot the server.
After the system reboots, the console output goes to the video port by default.
Configuring Sun Fire X4150 Server RAID
Drives
After you configure the Solaris OS, you might need to configure the RAID drives.
RAID Drive Overview
The Sun Fire X4150 Server has two optional RAID HBA (HBA) cards. You can access
RAID configuration through the HBA card BIOS. To access the LSI card BIOS, press
Ctrl-C. To access the Sun StorageTek card BIOS, press Ctrl-A:
The system will have the preinstalled OS on HD0. When the Solaris OS installation
has been completed, the option to upgrade your single-disk OS to a mirrored RAID
solution is available.
The configuration procedure is different for each supported controller card. For
example, a Sun StorageTek HBA card has many more options for RAID
configuration than an LSI HBA card. Configure the RAID depending on your needs
as shown in
TABLE 4-3.
TABLE 4-2 Sun Fire X4150 RAID HBA cards
RAID HBA cards Press for BIOS
Sun StorageTek
Ctrl-A
LSI 3081E
Ctrl-C