User's Manual

60 Sun Fire X4150 Server Installation Guide • May 2009
13. Set the Date, Time, and Time Zone settings for your locale. Click Next.
The network software installs and configures the operating system.
The Network Settings page appears.
The Workgroup or Computer Domain page appears.
14. Configure the computer to be part of a Domain or Workgroup, and then
click Next.
The Performing Final Tasks page appears and the server restarts
automatically when completed.
Configuring Sun Fire X4150 Server RAID
Drives
After you configure the Windows Server 2003 R2 OS, you might need to configure
the RAID drives.
RAID Drive Overview
The Sun Fire X4150 server has two optional RAID Host Bus Adapter (HBA) cards.
You can access RAID configuration through the HBA card BIOS. To access the LSI
card BIOS, press
Ctrl-C. To access the Sun StorageTek card BIOS, press Ctrl-A:
The system will have the preinstalled OS on HD0. When the Windows Server 2003
R2 OS installation has been completed, the option to upgrade your single-disk OS to
a mirrored RAID solution is available.
The configuration procedure is different for each supported controller card. For
example, a Sun StorageTek HBA card has many more options for RAID
configuration than an LSI HBA card. Configure the RAID depending on your needs
as shown in
TABLE 5-2.
TABLE 5-1 Sun Fire X4150 server RAID HBA cards
RAID HBA cards Press for BIOS
Sun StorageTek Ctrl-A
LSI 3081E Ctrl-C