Carveasy™ Electric Knife Instruction Booklet This book covers the use and care of the following Sunbeam Electric Knives: EK3800 Sunbeam Carveasy™ EK5600 Sunbeam Carveasy Pro™ Please read these instructions carefully and retain for future reference.
Contents Sunbeam’s Safety Precautions 1 Features of your Sunbeam Carveasy Pro 2 Features of your Sunbeam Carveasy 3 Using your Sunbeam Carveasy Knife 4 Slicing Hints 5 Care and Cleaning 6 Important instructions – retain for future use.
Sunbeam’s Safety Precautions SAFETY PRECAUTIONS FOR YOUR • Serrated edges of the blades are very sharp. SUNBEAM ELECTRIC KNIFE. • Do not allow children to play with blades. • Caution is necessary when handling the blades. • • • • • • • • • Sunbeam is very safety conscious when designing and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance.
Features of your Sunbeam Carveasy™ Pro Blade release button Soft touch ergonomic handle Extra long stainless steel blades Double movement safety trigger Neon power light Handy hang up loop EK5600 Pictured Micro serrated stainless steel blades Serrated stainless steel blades are durable and sharp for efficient slicing and carving. Blade release button Conveniently located at the top of the handle for thumb action release of the stainless steel blades.
Features of your Sunbeam Carveasy™ Blade release button Soft touch ergonomic handle Extra long stainless steel blades Double movement safety trigger Neon power light Handy hang up loop EK3800 Pictured Micro serrated stainless steel blades Serrated stainless steel blades are durable and sharp for efficient slicing and carving. Blade release button Conveniently located at the top of the handle for thumb action release of the stainless steel blades.
Using your Sunbeam Knife 1. Interlock blades together before inserting into the appliance. To assemble blades, grasp shaft ends below the safety guards and slip the rivet on the tip of the other blade. See Figure 1. Bring blades together ensuring tips remain together. Note: Always use both blades when operating the Carveasy™ and the Carveasy™ Pro. under the handle to activate the motor. Releasing the switch will automatically stop the motor. Warning: Avoid contact with moving parts.
Slicing Hints Always place food to be sliced on a wooden or plastic cutting board. Do not slice food on china; metal or bench tops, as scratching may occur. Guide blades through food. A sawing action is not necessary. Do not force blades through food. To maintain the sharpness of blades, do not cut through bones, fruit pips or stones or any other hard substances. For best results when carving meat and poultry allow cooked meat to stand for 10-15 minutes before slicing.
Care and Cleaning Warning: Ensure the unit is switched off and the plug removed from the power outlet before removing the blades and/or cleaning. Unlock the blades by sliding apart. Always hold blades by the shaft end, behind the safety guard, when handling and cleaning. Wash the blades in hot soapy water with a soft cloth or sponge. Rinse thoroughly and dry completely. Do not use abrasive scouring 6 pads or powders on blades. After cleaning, always store blades in plastic sleeves.
Notes
Notes
12 Month Replacement Guarantee In the unlikely event that this appliance develops any malfunction within 12 months of purchase (3 months commercial use) due to faulty materials or manufacture, we will replace it for you free of charge. Should you experience any difficulties with your appliance, please phone our customer service line for advice on 1300 881 861 in Australia, or 0800 786 232 in New Zealand. Alternatively, you can send a written claim to Sunbeam at the address listed below.
Need help with your appliance? Contact our customer service team or visit our website for information and tips on getting the most from your appliance. In Australia Visit www.sunbeam.com.au Or call 1300 881 861 In New Zealand Visit www.sunbeam.co.nz Or call 0800 786 232 is a registered trademark. ‘Carveasy’ is a trademark of Sunbeam Corporation. Made in China. Due to minor changes in design or otherwise, the product may differ from the one shown in this leaflet. © Copyright.
