SB-WM-T-XL-BLK / SB-WM-F-XL-BLK Weatherproof Universal Fixed and Tilt Mount for Extra-Large TVs
WARNINGS: • Installation by a qualified professional is highly recommended for this product. • Do not begin installation until you have thoroughly read and understand these instructions. • This mount supports TVs up to VESA 1000x700, and a maximum load of 250 lbs. (113.6kg). • Ensure the mounting wall will safely support four times the combined weight of the Mount and TV panel. • The manufacturer does not accept responsibility for incorrect installation.
INSTALLATION: Step 1: Mount the Wall Bracket Assembly For Mounting on a Stud Wall A. Hold the wall plate in the desire location and mark the mounting holes on the wall. (Figure 1) B. Pre-drill top and bottom holes into three wood studs using a 1/4” drill bit. Use all 6 lag bolts across the left, center and right portion of the wall plate. Be sure to drill into the center of the studs at least 2-1/2” deep. The use of a stud finder is highly recommended. Figure 1 C.
Step 3: Hang TV on the Wall Plate A. Carefully lift the TV to hook the arms over the top lip of the wall plate. Allow the lower portion of the arms to swivel in under the bottom lip of the wall plate. Do not release the TV until it is completely connected to the wall plate. Figure 5 ADJUSTMENTS: Adjust Horizontal Level and Tilt Forward Tilt Adjustment (SB-WM-T-XL-BLK) A. Turn tilt adjustment lever (ratchet) clockwise to tighten grip; counterclockwise to loosen grip. B.
