Veranda 4K HDR Operator’s Manual Models: SB-V-43-4KHDR SB-V-55-4KHDR SB-V-65-4KHDR MVE-003-00 Revision 180918_1515
Important Safety Instructions Dear SunBrite Customer: Congratulations on the ownership of your SunBrite all-weather outdoor LCD TV, and welcome to the family of satisfied SunBrite customers. You are in great company, with thousands of homeowners and esteemed commercial facilities such as Yankee Stadium, Fenway Park, Disney World, and Sea World who have trusted us to deliver superior performance, lasting durability and the enjoyment of superb television viewing in the great outdoors.
Important Safety Instructions 4K HDR Veranda Operation Manual Page 3
Important Safety Instructions Cleaning Instructions: See “Care of SunBrite” on page 46. Attachments: Do not use attachments not specifically recommended by the manufacturer. Use of improper attachments can result in accidents. Power Source: SunBrite must operate on a power source indicated on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.
Table of Contents CONTENTS Important Safety Instructions..........................................................................................................................................................................2 Part Names ............................................................................................................................................................................................................6 Remote Control Unit................................................
Part Names TV (Front) (Side) * See page 8 for button operations. Caution When using the ethernet port for IP control, connect the cable to the network switch before connecting to the SunBriteTV ethernet port. SPEAKER BAR OUTPUT. • See page 43 for optional speaker bar connection. • ARC See page 41 for details on the Audio Return Channel. • See page 9 for details on the Input Select function.
Remote Control Unit Note: SunBrite TVs use the Sony TV IR codeset. When programming a universal remote or control system try Sony IR codes if SunBrite TV codes are not listed. 1 POWER ON: Switch the TV power on. 2 POWER OFF: Switch the TV power off. 3 0–9: Set the channel. 4 - (Dash): Set a digital channel. 5 FREEZE: Freeze not supported on Veranda 2 series 6 VOL+/-: Set the volume. 7 / / / , ENTER: Select a desired item on the screen. 8 SOUND: Change sound preset modes.
SunbriteTV Remote Control Unit (Continued) Note: SunBrite TVs use the Sony TV IR codeset. When programming a universal remote or control system try Sony IR codes if SunBrite TV codes are not listed. 15 RETURN: Return to the previous channel. 16 MUTE: Mute the sound. 17 CH+/- : Select the channel. 18 MENU: Display the menu screen. 19 MTS: Selects the MTS/SAP or the audio mode during multichannel audio broadcasts.(Antenna/Cable only) 20 BACK: Return to the previous menu screen.
Displaying an External Equipment Image To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV. 1. Press INPUT. The INPUT list screen displays. 2. Press / to select the input source. An image from the selected source automatically displays. You can also select the input source by pressing INPUT. Each time INPUT is pressed, the input source toggles.
Watching TV INITIAL INSTALLATION Perform the following steps before you press POWER on the remote control unit. 1. Insert the batteries into the remote control unit. 2. Connect the antenna cable to the TV. 3. Plug in the AC cord to the AC outlet. Select Antenna or Cable 1. Press / to select and then press ENTER. 2. Select Start if you will be using Antenna or Cable input, otherwise select Skip. Page 10 All Rights Reserved.
Watching TV INITIAL INSTALLATION (CONTINUED) 3. The tuner will scan for available channels and store them into memory. This process can take from 3-10 minutes. 4. When the scan process is complete, select exit setup.
Direct Button Operation CHANGING CHANNELS You can change channels in several ways. Method 1 Using CH +/- on the remote control unit or on the TV. Method 2 Using remote control buttons 0-9, - (Dash). Examples: To select a 1 or 2-digit channel number (e. g., Channel 5): Press 5 ENTER To select a 3-digit channel number (e. g., Channel 115): Press 1 1 5 ENTER To select a 4-digit channel number (e. g., Channel 22.1): Press 2 2 - (Dash) 1 ENTER Method 3 Selecting the program from the Channel list. 1.
Direct Button Operation MUTE Mutes the current sound output. Press MUTE. will be displayed on the screen, and the sound is silenced.
Direct Button Operation CHANNEL RETURN • Press R (Ch Return) to switch to the previously tuned channel. • Press R (Ch Return) again to switch back to the currently tuned channel. • Note: R (Ch Return) will not work if no channel has been changed after the TV is turned on Page 14 All Rights Reserved.
Direct Button Operation AUDIO MTS/SAP stereo mode The TV has a feature that allows reception of sound other than the main audio for the program. This feature is called Multi-channel Television Sound (MTS). The TV with MTS can receive mono sound, stereo sound and Secondary Audio Programs (SAP). The SAP feature allows a TV station to broadcast other information, which could be audio in another language or something completely different like weather information.
Direct Button Operation SLEEP TIMER Allows you to set a time when the TV automatically switches to standby. Press SLEEP. • The remaining time displays when the sleep timer has been set. • Each time you press SLEEP, the remaining time switches as shown below. • Highlight the desired selection and press enter Page 16 All Rights Reserved.
Direct Button Operation SOUND MODE Sound MODE gives you several audio setting options to choose from to best match the surrounding environment of the TV, which can vary due to factors like listening enviroment, type of program watched or the type of device connected. Press SOUND. Sound menu OSD displays.
On-Screen Display Menu PICTURE MODE Picture mode gives you several viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like ambient light, type of program watched or the type of device connected. Press Picture button. Current picture mode displays. Standard: For a highly defined image in a normal lighting. Movie: For a movie. Vivid: For a clear-cut image emphasizing high contrast, useful for sports viewing. Game: Gaming.
Direct Button Operation CLOSED CAPTIONS AND DIGITAL CLOSED CAPTIONS Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider. Digital Closed Caption service is a new caption service available only on digital TV programs (also at the discretion of the service provider).
Direct Button Operation CLOSED CAPTIONS AND DIGITAL CLOSED CAPTIONS (CONTINUE) Examples: In a case where there are two closed caption services provided (for instance, Digital CC(ENG) and CC1), and Digital CC(ENG) is displayed as your current selection, if Digital CC(ENG) is not broadcast for the next program, the other closed caption service, CC1, will be displayed in parentheses.
Direct Button Operation ASPECT MODE You can select the screen size. 1. Press ASPECT. • The Aspect Mode menu displays. • The menu lists the Aspect Mode options selectable for the type of video signal currently being received. 2. Press ASPECT or GKProjA_a/GKProjA_b while the View Mode menu is displayed to select a desired item on the menu. • You can sequentially select an Aspect Mode that has its own aspect ratio. FOR HD PROGRAMS Stretch Full Screen (Dot By Dot) S.
Direct Button Operation ASPECT MODE (CONTINUED) For 4:3 programs Example: Screen size images Side Bar Suitable for viewing conventional 4:3 programs in their normal format. S. Stretch (Smart Sketch) Suitable for stretching 4:3 programs to fill the screen. Zoom Stretch Suitable for viewing wide-screen 2.35:1 anamorphic DVDs in full screen. This mode is useful for 1.78:1 DVDs. When viewing 1.85:1 DVDs, stretch mode will still show very thin black bands at the top and bottom of the screen.
Direct Button Operation ASPECT MODE (CONTINUE) For PC Example: Screen Size Images Input Signal Auto 4:3 Keeps the original aspect ratio in a full screen display. Input Signal 16:9 Zoom For viewing widescreen programs. The top and bottom of the image is cropped. Stretch An image fully fills the screen. Stretch An image fully fills the screen. Full Screen (Dot by Dot) Detects the resolution of the signal and displays an image with the same number of pixels on the screen.
On-Screen Display Menu Introduction 1. User Menu Option Title • This indicates the item currently selected. • Press ENTER to go to the adjustment screen for this item. 2. Hightlighted Menu Option • This indicates the currently selected item. 3. Item displayed in white • This indicates that the item can be selected. 4. Item displayed in gray • This indicates that the item cannot be selected.
On-Screen Display Menu ON-SCREEN DISPLAY MENU OPERATION 1. Press MENU to display the MENU screen. 2. Press / to select the desired menu. Press / to select a specific adjustment item, and then press ENTER. • Additional related adjustment items may be displayed. Press / to select the desired item. 3.
On-Screen Display Menu MENU OPERATION BUTTONS Using the Remote Control Use the following buttons on the remote control to operate the menu. MENU: Press to open or close the menu screen. / / / : Press to select a desired item on the screen or adjust a selected item. ENTER: Press to go to the next step or complete the setting. BACK: Press to return to the previous step. Using the Control Panel Of The Tv You can also operate the menu with the control panel of the TV.
Audio AUDIO Note: For operating the on-screen display menu. See pages 24-26. Sound Mode Enter to select various sound mode presets Movie/Music/Sport/User Speakers Turn the TV internal speakers on or off Analog Audio Out Set the output of the 3.5mm Analog Audio output. Fixed/Variable Digital Audio Out Set the output mode of the TosLink digital audio (Off/Dolby Digital/PCM) Balance Set the balance to the Left and Right speaker, default is 0 left and right equal output.
On-Screen DIsplay Menu PICTURE Note: For operating the on-screen display menu. See pages 24-26.
On-Screen DIsplay Menu ADVANCED PICTURE Note: For operating the on-screen display menu. See pages 24-26.
On-Screen Display Menu LINK Note: For operating the on-screen display menu. See pages 24-26. Ethernet Select to change the ethernet network type from DHCP(Dynamic) or Static CEC Settings Select to change Link CEC Control settings HDMI (Mode) Select 2.0 for EDID 2.0 full 4k, Select 1.4 for legacy EDID 1.
On-Screen Display Menu SYSTEM Note: For operating the on-screen display menu. See pages 24-26. Sleep Timer Set the time for auto turn off of the TV (30/60/90/120/180 minutes) Same function as remote sleep button. Parental Controls Available only when TV(Tuner) input is selected. Default password is 0000 Select parental controls on TV channels based on the contents rating. Closed Caption Available only when TV(Tuner) input is selected. Select options for displaying closed caption text on the content.
On-Screen Display Menu SYSTEM Note: For operating the on-screen display menu. See pages 24-26.
USB Photo/Music/Video Playback PREPARATION You can connect the TV to a USB memory device to view pictures, listen to music, and watch videos. Note: • Depending on the USB memory device, the TV may not be able to recognize the recorded data. • It may take time to read the recorded data if the USB memory device contains many files or folders. • Use only alphanumeric characters for naming files. • File names over 80 characters (may vary depending on character set) may not be displayed.
USB Photo/Music/Video Playback SELECTING THE FOLDERS TO PLAY BACK • To play back data on a USB memory device, insert the USB memory device on the TV. • Use the following procedure to switch back to USB mode after switching from USB mode to another mode. 1. Select MMP(USB) from INPUT list screen. 2. Press / to select Video, Music or Photo, and then press ENTER. 3. Press / / to select the desired folder, and then press ENTER.
USB Photo/Music/Video Playback SELECTING THE FOLDERS TO PLAY BACK Video File Format File Extension Container Video Video .avi AVI MPEG-1 MPEG-4 SP/ ASP(XviD) MPEG-4 AVC (H.264) Motion JPEG MPEG-Audio LPCM MS-ADPCM AC3 .mkv MKV MPEG-1 MPEG-2 MPEG-4 SP/ ASP(XviD) MPEG-4 AVC (H.264) MPEG-Audio LPCM MS-ADPCM AC3 .asf .wmv ASF WMV MPEG-4 SP/ASP(XviD) WMV 7/8/9 LPCM WMA .mp4 MP4 MPEG-4 SP/ ASP(XviD) MPEG-4 AVC (H.264) Motion JPEG MPEG-Audio LPCM MS-ADPCM AC3 .mpg .
USB Photo/Music/Video Playback PLAYING BACK FILES ON A USB MEMORY DEVICE Note: • The screen images in this section are for the USB mode. Photo Mode Viewing Thumbnails Buttons for Thumbnail Operations Buttons / / / Description Select a desired item. Setup options for photo viewing; file sort and slideshow interval time Page 36 ENTER When selecting a folder icon: Enter this directory. When selecting a photo thumbnail: Start the slide show. BACK Return to the previous process. All Rights Reserved.
USB Photo/Music/Video Playback PLAYING BACK FILES ON A USB MEMORY DEVICE (CONTINUE) Slide Show The photos displayed on the thumbnail selection screen are displayed as a slide show. Buttons for slide show operation Buttons Description BACK Return to the thumbnail selection screen Left Arrow Previous file Down Arrow Displaying/hiding operation guidance. Right Arrow Next file Note: • Rotating photos only applies to the temporarily selected item and this setting is not saved.
USB Photo/Music/Video Playback PLAYING BACK FILES ON A USB MEMORY DEVICE (CONTINUE) MUSIC MODE Buttons for Music Mode Buttons / Page 38 / / Description Select a desired item. ENTER When selecting a folder icon: Enter this directory. When selecting a photo thumbnail: Start the slide show. BACK Return to the previous process. All Rights Reserved.
USB Photo/Music/Video Playback PLAYING BACK FILES ON A USB MEMORY DEVICE (CONTINUE) VIDEO MODE Buttons for File Selecting Operations Buttons / 4K HDR Veranda Operation Manual / / Description Select a desired item. ENTER When selecting a folder icon: Enter this directory. When selecting a photo thumbnail: When selecting a video file: Play the video. BACK End playback and return to the previous process.
Using LINK Operation CONTROLLING HDMI EQUIPMENT USING LINK CEC OPERATION What’s LINK Operation? • Using the HDMI CEC (Consumer Electronics Control) protocol, with LINK Operation you can interactively operate compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD). • To access this function: System Operation > Initial Setup > Input Settings > Link Setup > Link Operation. Note: • For connecting the TV to LINK-compatible equipment, use commercially available cables.
Using LINK Operation CONTROLLING HDMI EQUIPMENT USING LINK CEC OPERATION (CONTINUE) LINK Setup Make the settings to use LINK Operation. Set the settings with "Menu" > "Link" > "CEC Settings". CEC Function Select CEC Function to disable the LINK function even when a LINK-compatible HDMI device is connected to the TV. This function prevents the device from turning on or off unexpectedly due to a CEC command from the source device.
Appendix TV STAND • Before detaching (or attaching) the stand, make sure to turn off the TV and unplug the AC cord. 1. Unfasten the four screws used to secure the stand in place. Example: 2. Attach the stand to the TV. If necessary secure the stand to the table surface before attaching to the TV. Secure the stand to the TV using all 4 screws as shown. Note: • Be sure to always carry the TV by two people holding it with two hands. Page 42 All Rights Reserved.
Appendix OPTIONAL SPEAKER BAR The optional speaker bar and required adapter cable is not included in the purchase of a SunBrite TV. These accessories are available at SunBriteTV.com, local dealer or reseller. Before detaching (or attaching) the speaker, make sure to turn off the TV and unplug the AC cord. 1. Mount the speaker bar to the bottom of the Veranda Outdoor TV. 2. Attach the 4 conductor Din adapter to the speaker bar connector and then plug the 3.
MOUNTING THE TV ON THE WALL Standard dimensions for wall mount kits are shown below. Visit www.SunBriteTV.com for information on all available mounts. • The mounting means should be strong enough to bear the weight of the display. • The wall mounting bracket should have UL or related approval Page 44 All Rights Reserved.
Appendix Wallmount Dimensions (A x B) SB-V-43-4KHDR 200mm x 200mm SB-V-55-4KHDR SB-V-65-4KHDR 400mm x 400mm Wallmount Screws M6 Trouble Solutions Cautions regarding use in high and low temperature environments When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. Do not leave the unit in a hot or cold location.
Appendix The example of an error message displayed on a screen An incompatible audio signal has been received. Check the output device settings Error code — Possible Solution This message is displayed when an audio format other than PCM, DTS or Dolby Digital is input. - Set the audio output format of connected external HDMI equipment to PCM or Dolby Digital. - Refer to the operation manual of the external equipment for setting details. CARING FOR THE LCD PANEL: 1.
Troubleshooting TROUBLESHOOTING Problem No power Possible Solution • Check if you pressed POWER on the remote control unit. • Is the AC cord disconnected? • Has the power been turned on? Unit cannot be operated. Remote control unit does not operate. External influences such as lightning, static electricity, may cause improper operation. In this case, operate the unit after first turning off the power of the TV or unplugging the AC cord and replugging it in after 1 or 2 minutes.
Troubleshooting Problem Possible Solution No sound • Is connection to other components correct? • Is the volume too low? • Is "Variable" selected in "Output Select"? • Have you pressed MUTE on the remote control unit? • Check the audio output of the connected external equipment. Is the volume too low or muted? • When external equipment is connected via an HDMI cable, you may need to configure the audio to be output through the HDMI cable.
Specifications SunBriteTV Model SB-V-43-4KHDR LCD Screen 43-inch diagonal Color Active Matrix TFT LED LCD Resolution 3840 x 2160 UHD 4k HDR Aspect Ratio 16:9 Blacklight Brightness - Surface Luminance, white 400 nits (cd/m2) Contrast Ratio 4000:1 Frame Rate 60hz H/V Viewing Angle 178o by 178o Response Time 8 milliseconds TV formats 2160p*,1080p, 1080i, 720p, 720i, 480p, 480i * using HDMI only Front View Side View All dimensions are in inches, dimensions in [ ] are [metric] Input Connecto
Specifications SunBriteTV Model SB-V-55-4KHDR LCD Screen 55-inch diagonal Color Active Matrix TFT LED LCD Resolution 3840 x 2160 UHD 4k HDR Aspect Ratio 16:9 Blacklight Brightness - Surface Luminance, white 400 nits (cd/m2) Contrast Ratio 4000:1 Frame Rate 60hz H/V Viewing Angle 178o by 178o Response Time 8 milliseconds TV formats 2160p*,1080p, 1080i, 720p, 720i, 480p, 480i * using HDMI only Front View Side View All measurements are in inches, except those in [ ] are [metric] Input Conn
Specifications SunBriteTV Model SB-V-65-4KHDR LCD Screen 65-inch diagonal Color Active Matrix TFT LED LCD Resolution 3840 x 2160 UHD 4k HDR Aspect Ratio 16:9 Blacklight Brightness - Surface Luminance, white 400 nits (cd/m2) Contrast Ratio 4000:1 Frame Rate 60hz H/V Viewing Angle 178o by 178o Response Time 8 milliseconds TV formats 2160p*,1080p, 1080i, 720p, 720i, 480p, 480i * using HDMI only Front View Side View All dimensions are in inches, dimensions in [ ] are [metric] Input Connecto
www.SunBrite.
