Installation Guide

Using Your Hose Reel

Connect leader hose to the in-tube (A) on the exterior of the

hose reel. Connect the opposite end of the leader hose to the

water supply.

Note: Your unit may contain either a male or female in-tube

connector.

Female In-Tube Male In-Tube

Actual images shown may differ based on model

purchased.

CAUTION

• DO NOT cross-thread hose connections. When attaching the garden

hose to the out-tube and/or the leader hose to the in-tube, be sure to

attach correctly. Cross-threading could cause permanent damage.

Options

1. Reel With Hose Guide

2. Reel Without Hose Guide

Connect a garden hose to the out-tube (B). Turn on the water

supply and check for leaks. If leaking occurs, turn off the water

supply and re-tighten the connection.

Note: For Option #1, feed the garden hose through the hose

guide prior to connecting to the out-tube (B). The hose guide (C)

must be aligned with the out-tube. If not aligned, crank the guide

handle or lift the guide release (D) to move the hose guide into

alignment with the out-tube. If guide release is used, make sure

it snaps back down to lock the hose guide into position.

Option 1

Option 2